نوع مقاله : مقاله کامل (پژوهشی)
نویسندگان
1
گروه سازه های دریایی دانشکده مهندسی دریا دانشگاه علوم و فنون دریایی خرمشهر
2
کارشناسی ارشد مهندسی آب و سازه های هیدرولیکی دانشکده مهندسی دریا دانشگاه علوم و فنون دریایی خرمشهر
3
استادیار دانشکده مهندسی دریا دانشگاه علوم و فنون دریایی خرمشهر
10.30482/jhyd.2026.602948.1789
چکیده
Hydraulic-jump stilling basins are widely used for energy dissipation downstream of hydraulic structures, yet geometric modifications can produce competing effects on tailwater depth, jump length, and energy dissipation. This study numerically investigates hydraulic jumps in rectangular and trapezoidal diverging stilling basins and evaluates their performance from a multi-indicator design perspective. Three-dimensional simulations were performed in STAR-CCM+ using a Reynolds-averaged Navier–Stokes formulation, the standard k-epsilon turbulence model, and a volume-of-fluid approach for free-surface tracking. Divergence angles of 3, 5, 7, and 9 degrees were examined over inlet Froude numbers of approximately 3.7–10, together with different trapezoidal side slopes. The numerical framework was assessed through grid-sensitivity analysis, turbulence-model comparison, and validation against available experimental data. Increasing divergence generally reduced the sequent-depth ratio and relative jump length while enhancing energy dissipation. Using criterion-specific averages over tested inflow conditions, rectangular basins produced mean improvements of approximately 19.4%, 24.5%, and 26.5% in depth ratio, jump length, and energy loss, respectively; the trapezoidal basin with Z=0.5:1 produced approximately 22.0%, 22.7%, and 34.0%. Regression-based sensitivity analysis identified divergence angle as the dominant control on jump-length reduction in rectangular basins, with the strongest relationship yielding R²=0.934. A weighted multi-indicator assessment showed that the rectangular and trapezoidal 9-degree configurations had nearly identical performance under equal weighting. Weight-sensitivity analysis further showed that the preferred configuration changes with design priorities: rectangular geometry favors jump-length and tailwater-depth reduction, whereas trapezoidal geometry favors energy dissipation. The results support a multi-objective interpretation of diverging stilling-basin design rather than identification of a universal optimum geometry.
کلیدواژهها
موضوعات