Chanson, H. (2006). Discussion of “discharge through a permeable rubble mound weir” by Kohji Michioku, Shiro Maeno, Takaaki Furusawa, and Masanori Haneda. Journal of Hydraulic Engineering, 132(4), 432-433.
Crookston, B.M. & Tullis, B.P. (2012). Arced labyrinth weirs. Journal of Hydraulic Engineering, 138(6), 555-562.
Fathi-moghaddam, M., Sadrabadi, M.T. & Rahmanshahi, M. (2018). Numerical simulation of the hydraulic performance of triangular and trapezoidal gabion weirs in free flow condition. Flow Measurement and Instrumentation, 62, 93-104.
Fritz, H.M. & Hager, W.H. (1998). Hydraulics of embankment weirs. Journal of Hydraulic Engineering, 124(9), 963-971.
Hager, W.H. & Schwalt, M. (1994). Broad-crested weir. Journal of Irrigation and Drainage Engineering, 120(1), 13-26.
Hasanian Shirvan, S., Pirzadeh, B., Rajaei, S.H. & Shafai Bejestan, M. (2023). Experimental investigation of gabion broad-crested weirs under upstream partial blockage conditions. Water Supply, 23(7), 2638-2648.
Horton, R.E. (1906). Weir experiments, coefficients, and formulas, Vol. 16, US Government Printing Office.
Kells, J.A. (1993). Spatially varied flow over rockfill embankments. Canadian Journal of Civil Engineering, 20(5), 820-827.
Kells, J.A. (1994). Reply: Spatially varied flow over rockfill embankments. Canadian Journal of Civil Engineering, 21(1), 163-166.
Kohji, M., Kohsei, T. & Takeharu, E. (2007). An experimental study on flow field in and around rubble mound river structures. Journal of Hydroscience and Hydraulic Engineering, 25(2), 37-45.
Leu, J.M., Chan, H.C. & Chu, M.S. (2008). Comparison of turbulent flow over solid and porous structures mounted on the bottom of a rectangular channel. Flow Measurement and Instrumentation, 19(6), 331-337.
Maeno, S., Michioku, K., Morinaga, S. & Ohnishi, T. (2002). Flow Characteristics of a weir made of natulal gravel. Annual J. Hydraulic Eng., 46, 493-498.
Michioku, K., Maeno, S., Furusawa, T. & Haneda, M. (2005). Discharge through a permeable rubble mound weir. Journal of Hydraulic Eng., 131(1), 1-10.
Mohamed, H.I. (2010). Flow over gabion weirs. Journal of Irrigation and Drainage Engineering, 136(8), 573-577.
Mohammadpour, R., Ghani, A.A. & Azamathulla, H. M. (2013). Numerical modeling of 3-D flow on porous broad crested weirs. Applied Mathematical Modelling, 37(22), 9324-9337.
Novak, P. & Cabelka, J. (1981). Models in hydraulic engineering, Pitman, London, UK.
Rahmanshahi, M. & Shafai Bejestan, M. (2020). Gene-expression programming approach for development of a mathematical model of energy dissipation on block ramps. Journal of Irrigation and Drainage Engineering, 146(2), 04019033, DOI:10.1061/(ASCE)IR.1943-4774.0001442.
Rahmanshahi, M., Jafari-Asl, J., Fathi-Moghadam, M., Ohadi, S. & Mirjalili, S. (2024). Metaheuristic learning algorithms for accurate prediction of hydraulic performance of porous embankment weirs. Applied Soft Computing, 151, 111150, https://doi.org/10.1016/j.asoc.2023.111150.
Rahmanshahi, M., Jafari-Asl, J., Shafai Bejestan, M. & Mirjalili, S. (2023). A Hybrid Model for Predicting the Energy Dissipation on the Block Ramp Hydraulic Structures. Water Resources Management, 37(8), 3187-3209.
Safarzadeh, A. & Mohajeri, S.H. (2018). Hydrodynamics of rectangular broad-crested porous weirs.
Journal of Irrigation and Drainage Engineering,
144(10), 04018028,
https://doi.org/ 10.1061/(ASCE)IR.1943-4774.0001338.
Salmasi, F. & Sattari, M.T. (2017). Predicting discharge coefficient of rectangular broad-crested gabion weir using M5 tree model. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 41, 205-212.
