<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>انجمن هیدرولیک ایران</PublisherName>
				<JournalTitle>نشریه علمی هیدرولیک</JournalTitle>
				<Issn>2345-4237</Issn>
				<Volume>19</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Experimental study of skimming flow on the stepped spillway in the non-aerated area using PIV</ArticleTitle>
<VernacularTitle>Experimental study of skimming flow on the stepped spillway in the non-aerated area using PIV</VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>9</LastPage>
			<ELocationID EIdType="pii">190121</ELocationID>
			
<ELocationID EIdType="doi">10.30482/jhyd.2023.418093.1677</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>کامیاب</FirstName>
					<LastName>حبیبی</LastName>
<Affiliation>گروه عمران، دانشکده فنی و مهندسی، دانشگاه صنعتی خاتم الانبیا بهبهان، بهبهان، ایران</Affiliation>
<Identifier Source="ORCID">0000-0002-0017-1489</Identifier>

</Author>
<Author>
					<FirstName>فریناز</FirstName>
					<LastName>عرفانی فرد</LastName>
<Affiliation>گروه عمران، دانشکده فنی و مهندسی، دانشگاه صنعتی خاتم الانبیا بهبهان، بهبهان، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-5949-8841</Identifier>

</Author>
<Author>
					<FirstName>سید امین</FirstName>
					<LastName>اصفری پری</LastName>
<Affiliation>عضو هیات علمی / گروه سازه آبی٫دانشکده مهندسی آب و محیط زیست / دانشگاه شهید چمران اهواز</Affiliation>
<Identifier Source="ORCID">0000-0001-6266-4062</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2023</Year>
					<Month>09</Month>
					<Day>26</Day>
				</PubDate>
			</History>
		    <Abstract>Understanding the flow behavior over stepped spillways has been the subject of many previous studies. Most of the studies conducted on stepped spillways have been in skimming flow conditions and the aerated parts of the spillway. Also, many of these results have been the result of observing the flow behavior on the side of the spillway, and there is still no complete view of the flow behavior in the depth of the spillway. The present study investigates the skimming flow behavior on a short and wide stepped spillway in a non-aerated area. For this purpose, the image processing technique called particle image velocimetry )PIV( has been used to process the movement path, velocity, and behavior of the flow and analyze it in the side sections and depth of the spillway. In a few previous studies, the more detailed behavior of the skimming flow has been investigated. The results of these studies have defined some of the characteristics of two sub-regimes of the skimming flow regime. However, the behavior of the sub-regimes mentioned by the researchers was mostly described as laboratory observations. This article takes a closer look at this issue. Also, in this study, it was shown that the flow behavior in the areas above the pseudo bottom line is almost similar to different cross-sections, but in the areas under the pseudo bottom line, the flow behavior experiences significant changes, so that its effects on the velocity profiles are quite evident., , , , , , , , , , , , , , , , , , ,, , , , , , , , , , , , , , , , , , ,, , , , , , , , , , , , , , , , , , ,, , , , , , , , , , , , , , , , , , ,</Abstract>
			<OtherAbstract Language="FA">Understanding the flow behavior over stepped spillways has been the subject of many previous studies. Most of the studies conducted on stepped spillways have been in skimming flow conditions and the aerated parts of the spillway. Also, many of these results have been the result of observing the flow behavior on the side of the spillway, and there is still no complete view of the flow behavior in the depth of the spillway. The present study investigates the skimming flow behavior on a short and wide stepped spillway in a non-aerated area. For this purpose, the image processing technique called particle image velocimetry )PIV( has been used to process the movement path, velocity, and behavior of the flow and analyze it in the side sections and depth of the spillway. In a few previous studies, the more detailed behavior of the skimming flow has been investigated. The results of these studies have defined some of the characteristics of two sub-regimes of the skimming flow regime. However, the behavior of the sub-regimes mentioned by the researchers was mostly described as laboratory observations. This article takes a closer look at this issue. Also, in this study, it was shown that the flow behavior in the areas above the pseudo bottom line is almost similar to different cross-sections, but in the areas under the pseudo bottom line, the flow behavior experiences significant changes, so that its effects on the velocity profiles are quite evident.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Skimming flow</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Stepped spillway</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Non-aerated Area</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">PIV</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jhyd.iha.ir/article_190121_23708244d70c7e737aee97c3f525c04b.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>انجمن هیدرولیک ایران</PublisherName>
				<JournalTitle>نشریه علمی هیدرولیک</JournalTitle>
				<Issn>2345-4237</Issn>
				<Volume>19</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Study of Transverse Flows and Secondary Currents in Compound Meandering Channel under the Effect of Building Arrangements</ArticleTitle>
<VernacularTitle>Study of Transverse Flows and Secondary Currents in Compound Meandering Channel under the Effect of Building Arrangements</VernacularTitle>
			<FirstPage>11</FirstPage>
			<LastPage>29</LastPage>
			<ELocationID EIdType="pii">197176</ELocationID>
			
<ELocationID EIdType="doi">10.30482/jhyd.2024.423155.1683</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>محمد</FirstName>
					<LastName>نقوی</LastName>
<Affiliation>دانشگاه ارومیه</Affiliation>
<Identifier Source="ORCID">0000-0002-3532-8933</Identifier>

</Author>
<Author>
					<FirstName>میرعلی</FirstName>
					<LastName>محمدی</LastName>
<Affiliation>استاد مهندسی عمران-هیدرولیک و مکانیک مهندسی رودخانه، دانشکده فنی دانشگاه ارومیه</Affiliation>
<Identifier Source="ORCID">0000-0001-7194-9393</Identifier>

</Author>
<Author>
					<FirstName>قربان</FirstName>
					<LastName>مهتابی</LastName>
<Affiliation>گروه مهندسی  آب دانشگاه زنجان</Affiliation>
<Identifier Source="ORCID">0000-0002-3532-8933</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2023</Year>
					<Month>11</Month>
					<Day>02</Day>
				</PubDate>
			</History>
		    <Abstract>In the present study, flow characteristics in compound meandering channels under the changes of building arrangement in the floodplains were investigated using a numerical simulation. A constant sinuosity factor of 1.21 and relative flow depths (Dr) of 0.29 to 0.49 were considered to illustrate the effect of the hydraulic parameters on the variations of the velocity components. Three types of building arrangements, including structural obstacles perpendicular to the flow of the floodplain (MHT, density=18.5%), structural obstacles parallel to the flow of the floodplain (MGT, density=23.7%), and checkered structural obstacles (MFT, density=23.7%), were used. The simulated data were in good agreement with the experimental data indicating the proper ability of the numerical model in simulation. The result reveals that in the concave arc of sections CS1 and CS7 (apex sections), changing the building arrangements has a negligible effect on the change of transverse and secondary flows due to the parallelism of the main channel flow and the floodplain flow as well as the insignificant effect of the floodplain flow on the main channel. But near the convex arc, these changes are more significant. Hence in section CS4, with the increase of the Dr from 0.29 to 0.49, for cases MAT, MGT, and MHT, the maximum value of depth-averaged transverse flow strength increases by 61%, 91%, and 41%, respectively. In section CS1, the secondary flow cells created in the case of MGT1 cover the entire section; however, in cases of MFT1 and MHT1, the size of the cell is small and is located on the left side of the section. In mid-sections, a small secondary cell in the same direction as the transverse flow (clockwise) is formed in the right corner near the bottom of the channel and gradually grows in the mid-sections and reaches its maximum size in section CS7. Along with the building arrangements of cases MFT1 and MHT1, the transverse component of the floodplain flow velocity (at the entrance of the floodplain flow to the main channel y/h=5) is weakened in the middle sections (CS3, CS4, and CS5). The dimensions of the secondary flow cell increase in the next sections and reach its largest value in section CS7.</Abstract>
			<OtherAbstract Language="FA">In the present study, flow characteristics in compound meandering channels under the changes of building arrangement in the floodplains were investigated using a numerical simulation. A constant sinuosity factor of 1.21 and relative flow depths (Dr) of 0.29 to 0.49 were considered to illustrate the effect of the hydraulic parameters on the variations of the velocity components. Three types of building arrangements, including structural obstacles perpendicular to the flow of the floodplain (MHT, density=18.5%), structural obstacles parallel to the flow of the floodplain (MGT, density=23.7%), and checkered structural obstacles (MFT, density=23.7%), were used. The simulated data were in good agreement with the experimental data indicating the proper ability of the numerical model in simulation. The result reveals that in the concave arc of sections CS1 and CS7 (apex sections), changing the building arrangements has a negligible effect on the change of transverse and secondary flows due to the parallelism of the main channel flow and the floodplain flow as well as the insignificant effect of the floodplain flow on the main channel. But near the convex arc, these changes are more significant. Hence in section CS4, with the increase of the Dr from 0.29 to 0.49, for cases MAT, MGT, and MHT, the maximum value of depth-averaged transverse flow strength increases by 61%, 91%, and 41%, respectively.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Compound meandering channel</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Building arrangements</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Transverse flow</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Secondary cell</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jhyd.iha.ir/article_197176_367566964ec3a65c4825dc8c143c5243.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>انجمن هیدرولیک ایران</PublisherName>
				<JournalTitle>نشریه علمی هیدرولیک</JournalTitle>
				<Issn>2345-4237</Issn>
				<Volume>19</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>A New Machine Learning Model for Predicting Suspended Sediment Load</ArticleTitle>
<VernacularTitle>A New Machine Learning Model for Predicting Suspended Sediment Load</VernacularTitle>
			<FirstPage>31</FirstPage>
			<LastPage>45</LastPage>
			<ELocationID EIdType="pii">210796</ELocationID>
			
<ELocationID EIdType="doi">10.30482/jhyd.2024.453360.1701</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>الهام</FirstName>
					<LastName>قنبری عدیوی</LastName>
<Affiliation>گروه مهندسی آب دانشگاه شهرکرد</Affiliation>
<Identifier Source="ORCID">0000-0002-7781-0138</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>04</Month>
					<Day>20</Day>
				</PubDate>
			</History>
		    <Abstract>Predicting suspended sediment load is important for water resource management, water quality protection, erosion control, infrastructure planning, flood management, ecological conservation, pollution control, and environmental impact assessments. As a novel aspect of this study, the ANFIS-M5T model is introduced and used to predict suspended sediment loads. Our study combines the adaptive neuro-fuzzy inference system (ANFIS) and the M5T model to create a hybrid model for predicting suspended sediment load (SSL). The lagged rainfall, discharge, and SSL values were used to predict SSL. The results showed that the introduced ANFIS-M5T model performs better than other models so that it had the lowest mean absolute error (MAE: 525), the highest Nash Sutcliffe efficiency (0.98) and the lowest Percent bias (4).The ANFIS model had the second lowest MAE of 576, followed by MLP (586), RFN (682), and M5T (981). Thus the ANFIS-M5T was a reliable tool for predicting SSL. By tackling the obstacles, assessing various methods, and showcasing the ANFIS-M5T model&#039;s efficiency, our research contributes to the continuous improvement and advancement of sediment measurement techniques and tools.By carrying pollutants, nutrients, and heavy metals, suspended sediments can significantly impact water quality (Salih et al., 2020). A high sediment load can cause problems for dams, bridges, and water treatment facilities. During flood events, sediment loads often increase dramatically. The sediment load can also be a good indicator of soil erosion in the watershed. Suspended sediments can affect water clarity and quality, which is crucial for both aquatic life and human uses of water, such as drinking and recreation (Gupta et al., 2021). Predicting sediment loads can contribute to flood risk assessment and management strategies .Accurately forecasting sediment load is crucial and significant for effective water resource management, as it aids in understanding and quantifying sediment transport in rivers, reservoirs, and other water bodies. The ANFIS-M5T model excels in predicting suspended load, which is essential for planning and optimizing reservoir operations. By leveraging these predictions, water resource managers can determine suitable sediment management practices, such as sediment flushing or periodic dredging, to ensure efficient and sustainable reservoir operations.The ANFIS-M5T model offers reliable predictions that help evaluate the potential impacts of projects on water quality, aquatic habitats, and downstream ecosystems. It enables water resource managers to identify areas with high sediment loads and implement targeted erosion control measures. Additionally, the model contributes to environmental impact assessments by providing accurate predictions of suspended sediment load, supporting the evaluation of potential impacts on sensitive ecosystems and aiding in the development of appropriate mitigation strategies. Our study uses the ANFIS-M5T model to predict suspended sediment load in a reservoir basin. The limitations of the methodologies present in such studies include restrictions in the accuracy of experimental models, as well as limitations in other machine learning methods like MT5, which are explained in the introduction of the paper. Regarding the limitations of the combined approach introduced in this research, one can point to constraints in optimizing the model structure, training time, and some complexities during implementation. However, considering that advanced computer systems are available today, these limitations can be addressed.In summary, based on the above literature, considering the limitations mentioned about the M5T model, a new model that does not have these issues and limitations will be very helpful. In fact, the main goal of this study is to overcome the limitations of the M5T model and predict SSL data close to reality. The novelty of this study is the introduction of a new hybrid model for the mentioned purpose, which we called ANFIS-M5T.</Abstract>
			<OtherAbstract Language="FA">Predicting suspended sediment load is important for water resource management, water quality protection, erosion control, infrastructure planning, flood management, ecological conservation, pollution control, and environmental impact assessments. As a novel aspect of this study, the ANFIS-M5T model is introduced and used to predict suspended sediment loads. Our study combines the adaptive neuro-fuzzy inference system (ANFIS) and the M5T model to create a hybrid model for predicting suspended sediment load (SSL). The lagged rainfall, discharge, and SSL values were used to predict SSL. The results showed that the introduced ANFIS-M5T model performs better than other models so that it had the lowest mean absolute error (MAE: 525), the highest Nash Sutcliffe efficiency (0.98) and the lowest Percent bias (4).The ANFIS model had the second lowest MAE of 576, followed by MLP (586), RFN (682), and M5T (981). Thus the ANFIS-M5T was a reliable tool for predicting SSL. By tackling the obstacles, assessing various methods, and showcasing the ANFIS-M5T model&#039;s efficiency, our research contributes to the continuous improvement and advancement of sediment measurement techniques and tools.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">Hybrid models</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Watershed Management</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Water Resource Management</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Machine learning models</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jhyd.iha.ir/article_210796_3299cf4d7f7126c274bf282caa234edd.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>انجمن هیدرولیک ایران</PublisherName>
				<JournalTitle>نشریه علمی هیدرولیک</JournalTitle>
				<Issn>2345-4237</Issn>
				<Volume>19</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Analytical Study on Free Vibration Dynamics of Compressible Fluids in Rigid-Walled Rectangular Tanks</ArticleTitle>
<VernacularTitle>Analytical Study on Free Vibration Dynamics of Compressible Fluids in Rigid-Walled Rectangular Tanks</VernacularTitle>
			<FirstPage>47</FirstPage>
			<LastPage>56</LastPage>
			<ELocationID EIdType="pii">210957</ELocationID>
			
<ELocationID EIdType="doi">10.30482/jhyd.2024.462137.1707</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سید مجتبی</FirstName>
					<LastName>موسوی نژاد</LastName>
<Affiliation>گروه عمران، دانشکده فنی و مهندسی فردوس، دانشگاه بیرجند، فردوس ، ایران</Affiliation>
<Identifier Source="ORCID">0000-0001-5722-2614</Identifier>

</Author>
<Author>
					<FirstName>امیر کیوان</FirstName>
					<LastName>شفیعی</LastName>
<Affiliation>گروه کامپیوتر، دانشکده فنی فردوس، دانشگاه بیرجند، بیرجند</Affiliation>
<Identifier Source="ORCID">0000-0003-2724-0349</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>06</Month>
					<Day>23</Day>
				</PubDate>
			</History>
		    <Abstract>This paper presents an in-depth analytical approach to understanding the free vibration dynamics of compressible fluids within rigid-walled rectangular tanks, emphasizing the significance of fluid-structure interaction (FSI). The study derives the governing partial differential equations and boundary conditions, providing exact solutions for two-dimensional and three-dimensional tank geometries. Through the calculation of natural frequencies using derived analytical expressions, the research examines the impact of varying tank dimensions on these frequencies via comprehensive sensitivity analyses.The introduction underscores the importance of understanding FSI in engineering fields like storage tanks, pipelines, and offshore platforms. It traces the historical development of research in this domain, highlighting key contributions from pioneers such as Westergaard, Housner, Jacobsen, Lemm, and others. The paper acknowledges the significant advancements made through analytical and numerical modeling techniques, as well as the growing role of machine learning in enhancing FSI simulation accuracy.The paper then presents the mathematical framework governing the behavior of compressible fluids within rectangular tanks. The core principles of mass and momentum conservation are expressed through the continuity and Navier-Stokes equations, respectively. The relationship between stress and strain rate is defined by the constitutive equation, while the Reynolds Transport Theorem relates the rate of change of a quantity within a control volume to the flux across the control surface and the rate of change within the volume itself.For the three-dimensional tank analysis, the paper derives the governing Helmholtz equation in the frequency domain, representing the spatial variation of the fluid velocity field within the tank. The boundary conditions are specified, ensuring no flow normal to the tank boundaries, mass conservation within the tank, and no normal gradient of velocity at the boundaries. The method of separation of variables is employed to solve the partial differential equation, leading to a general solution for the velocity field.The sensitivity analysis section explores the effects of varying tank dimensions on the first five natural frequencies. Each subsection focuses on a specific dimension (length, height, or width), systematically investigating how changes in that dimension influence the natural frequencies while keeping the other two dimensions constant. The results are presented in tabular and graphical forms, revealing a consistent decrease in natural frequencies across all modes as the length, height, or width of the tank increases.The paper attributes this phenomenon to the fascinating interplay between the fluid&#039;s kinetic and potential energies. As the tank dimensions increase, the fluid has more space for deformation, reducing the restoring force acting on the fluid elements when compressed. This decrease in potential energy is identified as the primary contributor to the observed lowering of natural frequencies with increasing reservoir size.Furthermore, the paper introduces the Rayleigh-Ritz method, a work and energy-based approach to analyzing vibrating systems. By utilizing approximate shape functions to represent the displacement of the vibrating body, the method calculates the potential and kinetic energies, leading to the derivation of fluid frequencies. The results obtained through the Rayleigh-Ritz method align well with the accurate method, validating its effectiveness in calculating fluid frequencies in reservoirs.The discussion section delves deeper into the theoretical underpinnings of the observed behavior. Analogies are drawn to familiar concepts, such as the sound produced by flutes of varying lengths and the behavior of waves in the ocean, to provide intuitive explanations for the observed trends. The paper emphasizes the significance of understanding this relationship between tank dimensions and resonance frequencies, as it offers engineers the ability to optimize tank designs for safe and efficient performance under various loading conditions, including seismic events.In conclusion, this study provides a comprehensive analytical framework for understanding the free vibration dynamics of compressible fluids in rigid-walled rectangular tanks, considering the crucial effects of fluid-structure interaction. The derived analytical expressions, combined with the Rayleigh-Ritz method, offer a powerful tool for calculating natural frequencies and analyzing the impact of tank dimensions on these frequencies. The results not only validate the analytical model but also provide valuable insights for engineers working on seismic-resistant storage facilities, acoustically tuned containers, and other applications involving fluid-structure interaction phenomena.</Abstract>
			<OtherAbstract Language="FA">This paper presents a comprehensive analytical study on the free vibration dynamics of compressible fluids within rigid-walled rectangular tanks, emphasizing the significance of fluid-structure interaction (FSI). The research derives the governing partial differential equations and boundary conditions, leading to exact solutions for two-dimensional and three-dimensional tank geometries. By employing the Rayleigh-Ritz method, the study incorporates the effects of fluid compressibility, offering a robust framework for analyzing the free vibration behavior. The paper calculates the natural frequencies through derived analytical expressions and examines the impact of varying tank dimensions (length, height, and width) on these frequencies via sensitivity analyses. Results reveal a consistent decrease in natural frequencies across all modes as the length, height, or width of the tank increases. This phenomenon is attributed to the interplay between the fluid&#039;s kinetic and potential energies, governed by the compressibility effects and the available space for wave formation within the larger tanks. The analytical approach, combined with the Rayleigh-Ritz method, provides a solid foundation for understanding FSI in engineering applications involving storage tanks and seismic-resistant structures. The study offers valuable insights into the significance of FSI considerations and highlights the importance of optimizing tank dimensions to achieve desired resonance characteristics, ensuring safe and efficient operation under various loading conditions.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">ارتعاش آزاد</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">حل دقیق</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">سیالات</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jhyd.iha.ir/article_210957_0054b26245aa97cbd28be807edf1a9d0.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>انجمن هیدرولیک ایران</PublisherName>
				<JournalTitle>نشریه علمی هیدرولیک</JournalTitle>
				<Issn>2345-4237</Issn>
				<Volume>19</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Efficacy of Advanced Seepage Mitigation Techniques in Earth Dams: A Case Study of Shahid Yaghoubi and Maloo Dams</ArticleTitle>
<VernacularTitle>Efficacy of Advanced Seepage Mitigation Techniques in Earth Dams: A Case Study of Shahid Yaghoubi and Maloo Dams</VernacularTitle>
			<FirstPage>57</FirstPage>
			<LastPage>68</LastPage>
			<ELocationID EIdType="pii">210958</ELocationID>
			
<ELocationID EIdType="doi">10.30482/jhyd.2024.476539.1717</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سید حسین</FirstName>
					<LastName>مهاجری</LastName>
<Affiliation>استادیار، دانشگاه خوارزمی</Affiliation>
<Identifier Source="ORCID">0000-0002-8056-293X</Identifier>

</Author>
<Author>
					<FirstName>حسین</FirstName>
					<LastName>افشاری مقدم</LastName>
<Affiliation>Department of Civil Engineering, Ferdowsi University of Mashhad, Mashhad, Iran</Affiliation>

</Author>
<Author>
					<FirstName>رضا</FirstName>
					<LastName>براتی</LastName>
<Affiliation>Department of Civil Engineering, Tarbiat Modares University, Tehran, Iran</Affiliation>

</Author>
<Author>
					<FirstName>محمد جواد</FirstName>
					<LastName>ماشین چیان</LastName>
<Affiliation>Department of Civil Engineering, Sharif University of Technology, Tehran, Iran</Affiliation>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>09</Month>
					<Day>02</Day>
				</PubDate>
			</History>
		    <Abstract>IntroductionSeepage is a critical concern in the design and operation of earth dams, as uncontrolled water flow through the dam body or foundation can compromise structural integrity, leading to potential failure. Over the years, various seepage mitigation techniques have been developed and implemented to ensure the safety and stability of earth dams. Among these, the application of geomembranes and cut-off walls has shown promise in reducing seepage rates. However, the effectiveness of these methods can vary significantly depending on site-specific conditions and the design of the dam. This study focuses on evaluating the efficacy of seepage control measures applied at two earth dams in Iran—Shahid Yaghoubi and Maloo dams—located in Khorasan Razavi province. Both dams have experienced seepage issues, prompting the implementation of advanced seepage mitigation strategies. This paper presents a detailed analysis of these strategies, their impact on seepage rates, and the overall implications for dam safety.MethodologyThe research methodology involves the use of GeoStudio 2012 software, specifically the SEEP/W module, to conduct finite element analysis of water flow through the dams under study. The SEEP/W module is well-suited for analyzing both steady-state and transient seepage conditions, allowing for a comprehensive evaluation of the implemented mitigation measures. The study began with the validation of seepage models using actual data recorded from the dams, ensuring that the simulations accurately reflect real-world conditions.For the Shahid Yaghoubi dam, validation was conducted using seepage data collected by onsite operators, while for the Maloo dam, piezometric pressure data was utilized. The validated models were then used to simulate different scenarios, including the application of a geomembrane layer on the dam&#039;s upstream face and the installation of a cut-off wall beneath the clay core. The effectiveness of these interventions was assessed by comparing seepage rates before and after their implementation.Case Study 1: Shahid Yaghoubi DamThe Shahid Yaghoubi dam, a rockfill structure with a clay core, has been operational since 1997. Located near Torbat Heydarieh city, the dam plays a critical role in regulating water flow from the Kal-Salar River. Despite its importance, the dam has experienced significant seepage issues, particularly in the downstream drainage gallery. The initial analysis revealed a seepage rate of 0.41 liters per second, with critical hydraulic gradients forming in the downstream drain.To mitigate these issues, two seepage control measures were proposed and analyzed using the SEEP/W module. The first involved applying a geomembrane layer to the dam&#039;s upstream face. The geomembrane, with a permeability coefficient of 5.0×10^-13 m/s, was found to reduce seepage by 15%, effectively eliminating critical hydraulic gradients within the dam. The second measure involved the construction of a cut-off wall beneath the dam core. Three different scenarios were modeled, with the wall positioned at various locations relative to the core. The results indicated that placing the cut-off wall in the downstream part of the core achieved the greatest reduction in seepage, decreasing the flow rate by 35%. However, the critical hydraulic gradient remained unchanged, highlighting the complexity of seepage dynamics within dam structures.Case Study 2: Maloo DamThe Maloo dam, an earth dam with a clay core, is located near Torbat Jam city. This dam also faced significant seepage issues, prompting the implementation of both a geomembrane layer and modifications to an existing cut-off wall. The initial seepage analysis revealed a flow rate of 0.36 liters per second, with critical hydraulic gradients identified near the core.The first mitigation measure involved applying a geomembrane layer to the upstream face of the dam. This intervention reduced seepage by 6%, a modest improvement attributed to the low reservoir levels during the study period. The second measure focused on increasing the height of the existing cut-off wall beneath the dam core by 4 meters. This modification led to a more substantial reduction in seepage, decreasing the flow rate by 25%. The results underscore the importance of tailoring seepage control strategies to the specific conditions of each dam, with structural modifications offering significant potential for improving dam safety.ConclusionsThe study&#039;s findings demonstrate the effectiveness of advanced seepage mitigation techniques in reducing water flow through earth dams, thereby enhancing their structural integrity and operational safety. The application of geomembranes and cut-off walls at the Shahid Yaghoubi and Maloo dams resulted in significant reductions in seepage, although the impact varied depending on the specific conditions of each dam. The results highlight the importance of site-specific adaptations in seepage management, with tailored strategies offering the best outcomes for maintaining dam safety.These case studies contribute valuable insights into the optimization of seepage control measures, emphasizing the need for ongoing monitoring and adaptive management to address the dynamic nature of seepage in earth dams. The research also underscores the critical role of precise instrumentation and reliable data in evaluating the effectiveness of mitigation strategies and ensuring the long-term safety of dam structures.Overall, this study advances the understanding of seepage dynamics and provides practical guidance for the implementation of seepage control measures in earth dam engineering. The findings have significant implications for the design, construction, and maintenance of earth dams, particularly in regions prone to seepage-related challenges.</Abstract>
			<OtherAbstract Language="FA">Effective seepage management is crucial for the structural integrity and operational safety of earth dams. This paper presents a detailed evaluation of seepage control strategies implemented at the Shahid Yaghoubi and Maloo dams in Khorasan Razavi province, Iran. Our study utilizes hydrological and structural data to assess the impact of specific interventions. For this purpose, numerical analysis methods and commercial GeoStudio software have been used. At the Shahid Yaghoubi dam, the application of a geomembrane on the upstream face resulted in a 15% reduction in seepage flow, while the addition of a cut-off wall downstream of the dam core led to a 35% decrease in seepage. Despite these improvements, the critical hydraulic gradient in the downstream drain remained unchanged, underscoring the complexity of seepage dynamics within dam structures. Similarly, at the Maloo dam, the installation of a geomembrane and the modification of the cut-off wall height beneath the dam core achieved reductions in seepage of 6% and 25%, respectively. These results highlight the importance of tailored, site-specific adaptations in effectively managing seepage. This research provides significant insights into the optimization of seepage control measures, contributing to the development of more durable and safer earth dam structures.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">ایمنی سد خاکی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کنترل تراوش</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">مهندسی هیدرولیک</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">کاربرد ژئوممبران</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">بهینه سازی دیوار آب بند</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jhyd.iha.ir/article_210958_b09f3f04f7a50c7311454c8502a330c8.pdf</ArchiveCopySource>
</Article>

<Article>
<Journal>
				<PublisherName>انجمن هیدرولیک ایران</PublisherName>
				<JournalTitle>نشریه علمی هیدرولیک</JournalTitle>
				<Issn>2345-4237</Issn>
				<Volume>19</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2024</Year>
					<Month>12</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Experimental and numerical study of flow over a triangular broad crested (crump or hump) weir with variable ramp slopes under different head ratios</ArticleTitle>
<VernacularTitle>Experimental and numerical study of flow over a triangular broad crested (crump or hump) weir with variable ramp slopes under different head ratios</VernacularTitle>
			<FirstPage>69</FirstPage>
			<LastPage>78</LastPage>
			<ELocationID EIdType="pii">211388</ELocationID>
			
<ELocationID EIdType="doi">10.30482/jhyd.2024.407121.1712</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>فرشته السادات</FirstName>
					<LastName>موسوی پور</LastName>
<Affiliation>مربی دانشگاه آزاد اسلامی واحد قم
دانشجوی دکتری دانشگاه تهران</Affiliation>
<Identifier Source="ORCID">0009-0005-5995-660X</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2024</Year>
					<Month>08</Month>
					<Day>16</Day>
				</PubDate>
			</History>
		    <Abstract>To determine the free surface flow characteristics over a triangular broad crested (crump or hump) weir with different slopes in upstream and downstream, a series of experiments were conducted in hydraulics laboratory using a 5 m long flume. The experiments were simulated by a numerical model, Flow 3D, in order to study the hydrodynamic field over the weir and compare experimental and computational results .The computational results, included testing different turbulence models: two equation k–ε, renormalized group (RNG) and the large eddy simulation (LES) besides nested mesh with high concentration in the weir location, showed a close agreement with experimental data. Flow characteristics such as free surface elevation (water surface profile), Froude number and specially the location of critical flow occurrence and discharge coefficient were studied in different head ratios and ramp slopes. Finally, according to the results it was understood that when steeper ramp slope facies upstream, the critical flow occurs exactly at the crest of the weir, while milder ramp facing upstream makes the critical flow appearance move forward and pass the crest. The critical state location showed no sensetivity to different head ratios. Moreover, discharge coefficients were calculated and it is concluded that Cd equaled 0.95 and 1.30 respectively for steep slope and mild slope facing upstream. It is worth mentioning that among different turbulence models offered by Flow 3D, k–ε model shows the best agreement with experimental data obtained from the laboratory. Hydraulic structures such as weirs are used for flow measurement, water level and sediment control in water channels. There are a wide variety of weir designations which have been developed for various applications (Akbari et al., 2019). Furthermore, they used as hydraulic jump control structure and compactness of stilling basins(Achour et al., 2022). In general, Weirs are categorized into sharp-crested and broad-crested groups.There are some proven advantages for each one. But broad-crested weirs are superior compared to other flow measuring structures, for instance: they show more stability rather than sharp-crested weirs, they are usually used as dams, especially in gabion weirs, etc., with sides ramps especially upstream face of the weir, they can easily pass sediments and floating objects (Malekzadeh et al., 2022).</Abstract>
			<OtherAbstract Language="FA">Abstract To determine the free surface flow characteristics over a triangular broad crested (crump or hump) weir with different with different upstream and downstream slopes, a series of experiments were conducted in hydraulics laboratory using a 5 m long flume. The experiments were simulated by a numerical model, Flow-3D, in order to study the flow characteristics such as free surface elevation (water surface profile), Froude number, discharge coefficient and specially  the  location of critical flow state in different head ratios and ramp slopes. To investigate the hydrodynamic field over the weir, the computational results, included different turbulence models: two-equation k–ε, renormalized group (RNG), and large eddy simulation (LES).  A nested mesh with higher resolution around the weir was employed and the computatinal results showed a close agreement with experimental data. Finally, according to the results it was found that when steeper ramp slope faces upstream, the critical flow occurs exactly at the crest of the weir, while milder ramp facing upstream makes the critical flow move backward just before the crest. The critical state location showed no sensetivity to different head ratios. Moreover, discharge coefficients were calculated and it is concluded that Cd equales 0.95 and 1.30 respectively for steep slope and mild slope facing upstream. It is worth mentioning that identification the accuracy of turbulence models’ functionality among different ones offered by Flow-3D in such experiments, requires employing an additional criterion besides water surface elevation.</OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">critical flow location</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">fraud number</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">Weirs</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">grade change</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">critical depth meters</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jhyd.iha.ir/article_211388_fded373b0e601c57b0106eefe44da171.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
