<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ArticleSet PUBLIC "-//NLM//DTD PubMed 2.7//EN" "https://dtd.nlm.nih.gov/ncbi/pubmed/in/PubMed.dtd">
<ArticleSet>
<Article>
<Journal>
				<PublisherName>انجمن هیدرولیک ایران</PublisherName>
				<JournalTitle>نشریه علمی هیدرولیک</JournalTitle>
				<Issn>2345-4237</Issn>
				<Volume>12</Volume>
				<Issue>4</Issue>
				<PubDate PubStatus="epublish">
					<Year>2018</Year>
					<Month>01</Month>
					<Day>21</Day>
				</PubDate>
			</Journal>
<ArticleTitle>Optimization of Geometry and Dimensions of Sheet Piles in Diversion Dams by the Use of Conformal Mapping Theory</ArticleTitle>
<VernacularTitle>استفاده از تئوری نگاشت همدیس در بهینه‌یابی موقعیت و زاویه قرارگیری دیواره‌های آب‌بند در سدهای انحرافی</VernacularTitle>
			<FirstPage>1</FirstPage>
			<LastPage>13</LastPage>
			<ELocationID EIdType="pii">56082</ELocationID>
			
<ELocationID EIdType="doi">10.30482/jhyd.2018.56082</ELocationID>
			
			<Language>FA</Language>
<AuthorList>
<Author>
					<FirstName>سعید</FirstName>
					<LastName>احمدیان</LastName>
<Affiliation>دانشجوی کارشناسی ارشد سازه‌های هیدرولیکی، دانشکده مهندسی، دانشگاه فردوسی مشهد</Affiliation>

</Author>
<Author>
					<FirstName>محمود</FirstName>
					<LastName>فغفور مغربی</LastName>
<Affiliation>استاد گروه مهندسی عمران، دانشکده مهندسی، دانشگاه فردوسی مشهد</Affiliation>
<Identifier Source="ORCID">0000-0002-0082-0020</Identifier>

</Author>
</AuthorList>
				<PublicationType>Journal Article</PublicationType>
			<History>
				<PubDate PubStatus="received">
					<Year>2016</Year>
					<Month>08</Month>
					<Day>22</Day>
				</PubDate>
			</History>
		    <Abstract>Movement of water in porous media is governed by Laplace equation. In this paper, the optimum location and the angle of inclination of cutoffs in diversion dams have been obtained by using conformal mapping theory to minimize the hydraulic gradient and uplift pressure. Finite element method is used to compare the results of the two methods too. The complex functions are used to analyze the seepage flow beneath the hydraulic structure. Schwarz-Christoffel transformation is one of the conformal mapping techniques. The physical plane beneath the hydraulic structure which is called z- plane and complex potential plane () are conformaly mapped on auxiliary half plane (t) by using this transformation. Finally, the function between z and  planes will be obtained and variation of uplift pressure in different points below the structure and variation of hydraulic gradients through downstream will be calculated. The results of the calculations show that the optimum location of the cutoff to minimize the uplift pressure is the heel of the apron and the angle of inclination in this location is decreased by increasing s/b where s and b are the lengths of cutoffs and hydraulic structure, respectively. The value of the angle of the inclination is 60° for s⁄b=1/3. The optimum location of the cutoff to minimize the exit gradients through downstream is the toe of the apron, the values of the angle of inclination for x⁄b≤0.6 are 10°, 30° and 60° respectively. The calculations are done for the other locations along the apron such as upstream and middle of the apron and the solutions are compared with the finite element method too. The comparison of the two methods shows a good consistency between these methods.</Abstract>
			<OtherAbstract Language="FA">حرکت آب در محیط متخلخل با معادله عمومی لاپلاس1 بیان می‌شود. در این مقاله با استفاده از تئوری نگاشت همدیس2 و روابط تحلیلی، موقعیت و زوایای قرارگیری بهینه دیواره‌های آب‌بند در سدهای انحرافی برای حداقل ساختن گرادیان‌های خروجی و زیرفشار مورد بررسی قرار گرفته و جواب‌های بدست آمده از این روش با روش‌های عددی نظیر روش اجزاء محدود مقایسه شده است. برای تحلیل جریان تراوش از زیر سازه‌های هیدرولیکی در روش تحلیلی از توابع مختلط استفاده می‌گردد. تبدیل شوارتز-کریستوفل3 یکی از روش‌های نگاشت همدیس است. با استفاده از تبدیل شوارتز-کریستوفل ناحیه فیزیکی زیر سازه هیدرولیکی در صفحه z و همچنین ناحیه جریان زیر سازه هیدرولیکی در صفحه w به روی نیم صفحه کمکی tنگاشت می‌گردد. نهایتاً با استفاده از این تبدیل رابطه بین صفحه z و w بدست خواهد آمد و با استفاده از این رابطه می‌توان تغییرات زیرفشار در نقاط مختلف زیر سازه و تغییرات گرادیان خروجی در امتداد پایین‌دست سازه هیدرولیکی را بدست آورد. نتایج محاسبات نشان می‌دهد که بهترین موقعیت آب‌بند به منظور کاهش زیرفشار، بالادست کف‌بند بوده و زاویه بهینه قرارگیری آن نسبت به افق با افزایش مقدار  که در آن b طول بند و s طول آب‌بند است، کاهش می‌یابد. این زاویه برای  معادل 60 درجه است. به منظور کاهش مقدار گرادیان هیدرولیکی خروجی در امتداد پایین‌دست، موقعیت بهینه آب‌بند در پایین‌دست است. در این حالت زاویه بهینه آب‌بند برای  که در آن x فاصله از انتهای پایین‌دست سازه است، زوایای 10، 30 و 60 درجه بوده و بعد از آن زوایای بزرگتر از 60 درجه بهینه هستند. برای قرارگیری آب‌بند در بالادست و وسط کف‌بند نیز محاسبات انجام گرفته و تمامی حالت‌ها با روش اجزاء محدود مقایسه شده که نشان دهنده تطابق خوب نتایج با یکدیگر است. 
 </OtherAbstract>
		<ObjectList>
			<Object Type="keyword">
			<Param Name="value">سدهای انحرافی</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">دیواره‌های آب‌بند</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">نگاشت همدیس</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">تبدیل شوارتز-کریستوفل</Param>
			</Object>
			<Object Type="keyword">
			<Param Name="value">بهینه یابی</Param>
			</Object>
		</ObjectList>
<ArchiveCopySource DocType="pdf">https://jhyd.iha.ir/article_56082_1d8ebb2deca53a21c4a47422ecf2ae1a.pdf</ArchiveCopySource>
</Article>
</ArticleSet>
