@article { author = {Sarvarian, J. and Mohammad Vali Samani, J. and Mohammad Vali Samani, H.}, title = {Optimal Flood Control with Combination of Rockfill Detention Dams and Levees}, journal = {Journal of Hydraulics}, volume = {7}, number = {2}, pages = {27-45}, year = {2012}, publisher = {Iranian Hydraulic Association}, issn = {2345-4237}, eissn = {2645-8063}, doi = {10.30482/jhyd.2013.15753}, abstract = {When the river flow rate is larger than the capacity of the river, the adjacent areas are prone to flooding. Structural methods of flood control usually are used to reduce flood hydrograph peak. Rockfill dam is a type of structural methods that controls the flood. Levee, with no effective change in the flood peak, is another structure that controls flood .  Simultaneous use of rockfill dams and levees will reduce the severity and power of flood and prevent flooding of the low lands adjacent to the river. In this way, the final options for flood control will be selected with more flexibility. The important point about dilatory flood control measures is suitable selection of their position. Depending on the topography and other environmental factors, location and design of rockfill dams and design of levees will be different. Accordingly, any kinds of proper design of these two methods can be effective in flood relief projects. Obviously, this combination is not the best with respect to the hydraulic and economic limitations. The purpose of this paper is to introduce a method in which the most appropriate design and location of dams and the most proper design for the levees in the residential area is taken into account. Other restrictions such as movement of the flood, total minimum cost of construction of dams and levees is also considered in this study. Reaching this goal requires a combination of basin simulation model with a nonlinear optimizer model, such as genetic algorithms.}, keywords = {Flood Control,Genetic algorithm,Levee,Optimal Combination,Rockfill Detention Dams}, title_fa = {کنترل بهینه سیلاب با ترکیب سدهای تأخیری پاره‌سنگی و خاکریزساحلی}, abstract_fa = {چنانچه میزان جریان آب رودخانه بیش از ظرفیت آبگذری مقطع اصلی رودخانه باشد، مناطق همجوار رودخانه در معرض سیلاب قرار می‌گیرند. روش‌های سازه‌ای کنترل سیلاب، معمولاً به‌منظور کاهش دبی اوج و یا جلوگیری از سیل‌بردگی به‌کار برده می‌شوند. سد پاره‌سنگی یک روش سازه‌ای کنترل سیل است که بخشی از جریان سیلابی در مخزن آن ذخیره شده و با گذشت زمان به تدریج و با دبی کمتری از میان بدنه سد تخلیه می‌شود. خاکریزساحلی نیز به عنوان یک روش سازه‌ای کنترل سیل، بدون تغییر مؤثر در دبی اوج سیلاب، باعث جلوگیری از سیل‌بردگی می‌شود. در صورتی که طرح کنترل سیلاب با مشارکت این دو روش انجام شود، علاوه بر کاهش قدرت و شدت سیلاب و جلوگیری از آب‌گرفتگی زمین‌های اطراف رودخانه، گزینه نهایی کنترل سیلاب با انعطاف‌پذیری بیشتری انتخاب خواهد شد. نکته مهم در رابطه با اقدام‌های تأخیری کنترل سیل، انتخاب درست موقعیت آنها در سطح حوضه می‌باشد. بسته به عوامل توپوگرافی و دیگر عوامل محیطی، مکان احداث سدهای پاره‌سنگی و همچنین طراحی این سدها و خاکریزساحلی متفاوت بوده و بر این اساس هر چینش و طراحی دلخواه از این دو روش سازه‌ای می‌تواند در تسکین سیلاب مؤثر واقع شود. بدیهی است ترکیب مذکور نه تنها از نظر هیدرولیکی بلکه از نظر اقتصادی نیز نمی‌تواند بهترین ترکیب ممکن باشد. هدف از این تحقیق، معرفی روشی است که در آن مناسب‌ترین طراحی ترکیبی از چینش سدهای پاره‌سنگی درون حوضه همراه با خاکریزساحلی در محدوده مسکونی پایین‌دست حوضه را ارائه نماید؛ به‌طوری که با در نظر گرفتن محدودیت‌های حاکم بر حرکت سیلاب، مجموع هزینه ساخت سدها و احداث خاکریزساحلی حداقل مقدار ممکن شود. رسیدن به هدف فوق نیازمند ترکیب مدل شبیه‌ساز حوضه با یک مدل بهینه‌ساز غیرخطی مانند الگوریتم ژنتیک می‌باشد که در این مقاله به آن پرداخته شده است.  }, keywords_fa = {Flood Control,Genetic algorithm,Levee,Optimal Combination,Rockfill Detention Dams}, url = {https://jhyd.iha.ir/article_15753.html}, eprint = {https://jhyd.iha.ir/article_15753_7d949c77013b2b8d6759c42428062a1d.pdf} }