ORIGINAL_ARTICLE
اصلاح هندسی حوضچه آرامش USBR VI با استفاده از مدل عددی
یکی از مستهلککنندههای انرژی رایج، حوضچه آرامش USBR VI است. این حوضچه، سازهای جعبهای شکل به همراه یک دیوار میانی و یک آستانه انتهایی است. در این تحقیق با استفاده از شبیهسازی عددی به کمک نرمافزار Flow3D هندسه حوضچه به نحوی اصلاح شده است که جریان خروجی دارای توزیع یکنواختتر سرعت نسبت به حالت استاندارد گردد. صحتسنجی مدل عددی با مقایسه فشار برداشت شده روی دیوار میانی و عمق جریان روی آستانه انتهایی در مدل فیزیکی و نیز مقایسه پروفیل سرعت در لوله ورودی انجام شده است. به منظور اصلاح الگوی جریان خروجی از حوضچه، 4 پارامتر سرعت متوسط طولی در محل آستانه انتهایی، سرعت در نزدیکی سطح آستانه، ضریب کوریولیس روی آستانه و توزیع دبی روی آستانه انتهایی انتخاب گردید. بر اساس این پارامترها بالغ بر یکصد طرح مختلف از تغییرات هندسی حوضچه بدست آمده و شبیه سازی شدند. در انتها با مقایسه نتایج برای طرحهای مختلف مشخص گردید حوضچهای که پس از دیوار میانی عرض حوضچه بتدریج افزایش یابد بهترین نتایج را خواهد داشت.
https://jhyd.iha.ir/article_82704_6f981ed4b5132e612f8626ec80777a49.pdf
2019-01-21
1
15
10.30482/jhyd.2019.82704
حوضچه آرامش USBR VI
اصلاح حوضچه
مدلسازی عددی
منحنی بیچلی
Flow3D
احسان
بهنام طلب
behnamtalab@yahoo.com
1
گروه مهندسی عمران، دانشکده فنی و مهندسی، دانشگاه حکیم سبزواری
LEAD_AUTHOR
مسعود
قدسیان
ghods@modares.ac.ir
2
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس تهران
AUTHOR
امیررضا
زراتی
zarrati@aut.ac.ir
3
دانشکده مهندسی عمران و محیط زیست، دانشگاه امیرکبیر
AUTHOR
سید علی اکبر
صالحی نیشابوری
salehi@modares.ac.ir
4
دانشکده مهندسی عمران و محیط زیست، دانشگاه تربیت مدرس تهران
AUTHOR
Aisenbrey, A.J., (1978). “Design of small canal structures, 1978: engineering technology pertaining primarily to the design of small canal structures of less than 100-cubic-feet-per-second capacity”. A Water Resources Technical Publication (USA).
1
Aleyasin, S.S., Fathi, N. and Vorobieff, P., (2015). “Experimental Study of the Type VI Stilling Basin Performance”. Journal of Fluids Engineering, 137(3), p. 034503.
2
Babaali, H., Shamsai, A. and Vosoughifar, H., (2015). “Computational modeling of the hydraulic jump in the stilling basin with convergence walls using CFD codes”. Arabian Journal for Science and Engineering, 40(2), pp. 381-395.
3
Beichley, G., (1978). “Hydraulic Design of Stilling Basin for Pipe or Channel Outlets”, Denver: USBR.
4
Bradley, J. & Peterka, A., (1955). “Progress Report No. II-Research Study on Stilling Basin, Energy Dissipator and Associated Appurtenances”, Denver: USBR.
5
Flow-3D, (2010). Flow-3D User Manual, Version 10.0. Flow Science, Inc., 10 edition.
6
Hattori, H. and Nagano, Y., (2010). “Investigation of turbulent boundary layer over forward-facing step via direct numerical simulation”. International Journal of Heat and Fluid Flow, 31(3), pp. 284-294
7
Nohani, E., (2015). “Numerical Simulation of the Flow Pattern on Morning Glory Spillways”. International Journal of Life Sciences, 9(4), pp. 28-31.
8
Peterka, A.J., (1984). Engineering monograph No. 25.
9
Schlichting, H. and Gersten, K., (2003). Boundary-layer theory. Springer Science & Business Media.
10
Seyedashraf, O., Elyasi, S., (2015), “Flow Structures in Sharply-Curved OpenChannel Bends-Numerical Comparison of Two CFD Models”, International Journal of Engineering & Technology Sciences.
11
Silva, M.R., (2013), “3D numerical modeling of flow along spillways with free surface flow. Complementary spillway of Salamonde”, TECNICO Lisboa.
12
Tiwari, H., (2013). “Analysis of baffle wall gap in the design of stilling basin model”. Int. J. Civil Eng, 4(4), pp. 66-71.
13
Verma, D., and Goel, A., (2000), “Stilling Basins for Pipe Outlets Using Wedge Shaped Splitter Block”, J. Irrig. Drain. Eng., 126(3), pp. 179–184.
14
Verma, D.V.S. and Goel, A., (2003). “Development of efficient stilling basins for pipe outlets”. Journal of irrigation and drainage engineering, 129(3), pp. 194-200.
15
ORIGINAL_ARTICLE
بررسی مسائل دارای دو سطح آزاد بر اساس روش گالرکین بدون المان- درون یاب نقطه ای شعاعی
گالرکین بدون المان (RPIM) و درون یاب نقطه ای شعاعی (EFG) از روش های بدون المان در زمینه مکانیک محاسباتی می باشند. در این مقاله یک روش محاسباتی با در نظر گرفتن یک ناحیه ثابت و یک ناحیه متغیر بر اساس روش ترکیبی گالرکین بدون المان- درون یاب نقطه ای شعاعی جهت بررسی مسائل سطح آزاد دو بعدی دارای دو سطح آزاد زیر دریچه شعاعی جهت محاسبه پروفیل سطوح آزاد، توزیع سرعت، فشار درون کانال و دبی آب خروجی از مجرای خروجی ارائه شده است. در روش ترکیبی گالرکین بدون المان- درون یاب نقطه ای شعاعی، توابع شکل بدست آمده از روش درون یاب نقطه ای شعاعی به عنوان توابع وزن در روش گالرکین بدون المان مورد استفاده قرار می گیرند که باعث ایجاد خاصیت دلتای کرانیکر در توابع شکل می گردد. در این روش بر خلاف روش گالرکین بدون المان، اعمال شرایط مرزی اساسی به راحتی صورت گرفته و توابع شکل دارای خاصیت دلتای کرانیکر می باشد. در این مطالعه، سیال عبوری، تراکم ناپذیر و غیر لزج فرض شده و نتایج حاصل از شبیه سازی با نتایج عملی بدست آمده از آزمون مدل هیدرولیکی مقایسه شده است که نتایج بدستآمده دارای هم خوانی جهت پروفیل سطح آزاد و توزیع فشار می باشد.
https://jhyd.iha.ir/article_82721_82d1e99d6d75cd8d82a79befd227db71.pdf
2019-01-21
17
32
10.30482/jhyd.2019.82721
روش های بدون المان
دو سطح آزاد
روش ترکیبی گالرکین بدون المان- درون یاب نقطه ای شعاعی
دریچه شعاعی
سید عبدالصمد
جوانمرد
jsamad2000@gmail.com
1
دانشگاه ازاد اسلامی
LEAD_AUTHOR
جوانمرد س. (1395). "آنالیز مسائل سرریز زیر دریچه شعاعی بر اساس روش گالرکین بدون المان-المان طبیعی"، مهندسی منابع اب، دوره 9، شماره 31، ص.ص. 61-72.
1
سلیمان بیگی ن.، حکیم زاده ح. و چناقلو م. (1392). "ترکیب روش VOF و هوش مصنوعی برای شبیهسازی سطح آزاد جریان سیال"، روشهای عددی در مهندسی (استقلال)، دوره 32، شماره 2، ص.ص. 15-32.
2
فرزین س.، حسن زاده ی.، اعلمی م. و فاتحی ر. (1393). "یک روشSPH تراکم ناپذیر ضمنی برای مسائل جریان سطح آزاد"، مهندسی مکانیک مدرس، دوره 14، شماره 4، ص.ص. 99-110.
3
Cheng, A. H-D, Liggett, J. A., and Liu, P. L-F. (1981). “Boundary calculations of sluice and spillway flows”. Journal of the Hydraulics Division. ASCE. 107: 1163-1178.
4
Daneshmand, F., and Kazemzadeh Parsi, M. J. (2004). “A meshless method for free surface flow through sluice gates”. 6th International Conference on Hydroinformatics, Singapur.
5
Daneshmand, F., Javanmard, S.A.S., Adamowski, Jan F.,Liaghat, T., Moshksar, M. M. (2012). “Two-dimensional natural element analysis of double-free surface flow under a radial gate”. Canadian Journal of Civil Engineering. 39: 643-653.
6
Daneshmand, F., Javanmard, S.A.S., Liaghat, T., Moshksar, M. M., Adamowski, Jan F. (2010). “Numerical solution for two-dimensional flow under sluice gate using natural element method”. Canadian Journal of Civil Engineering. 37: 1550–1559.
7
Daneshmand, F., Sharan, S. K., and Kadivar, M. H. (1999). Finite element analysis of double-free-surface flow through gates. Proc. 17th Canadian Congress of Applied Mechanics, McMaster Univ. Hamilton. 213-214.
8
Daneshmand, F., Sharan, S. K., and Kadivar, M. H. (2000). “Finite Element Analysis of Double-Free surface Flow through Slit in Dam”. Journal of the Hydraulics Division. ASCE. 126: 515-522.
9
Fangmeier, D. D., and Strelkoff, T. S. (1968). “Solution for gravity flow under a sluice gate”. Journal of the Engineering Mechanics. ASCE. 94: 153-176.
10
Ikegawa, M., and Washizu, K. (1973). “Finite element method applied to analysis of flow over a spillway crest”. International Journal for Numerical Methods in Engineering 6: 179-189.
11
Issacs, L. T. (1977). “Numerical solution for flow under sluice gates”. Journal of the Hydraulics Division. ASCE. 103: 473-481.
12
J I Chun-ning, WANG Yuan-zhan and WANG Jian-feng. (2005). “A Novel VOF-Type Volume-Tracking Method for Free-Surface Flows Based on Unstructured Triangular Mesh”. China Ocean Engineering. 19:529-538.
13
Larock B.E. (1975). “Flow over gated spillway crests”. Proceeding of 14th Midwestern Mechanics Conferance.University of Oklahama. March 24-26. 437-451.
14
Li, W., Xie, Q., and Chen, C. J. (1989). “Finite analytic solution of flow over spillways”. Journal of Engineering Mechanics. ASCE. 115: 2635-2648.
15
Liu, G.R. (2003). “Mesh Free Methods: Moving Beyond the Finite Element Method”, CRC Press LLC.
16
Masliah J.H., Nandakumar K., Hemphhill F., Fung L. (1985). “Body fitted coordinates for flow under sluice gates”. Journal of Hydraulic Engineering. 111: 922-933.
17
McCorquodale, J. A., and Li, C. Y. (1971). “Finite element analysis of sluice gate flow”. Transactions Engineering Institute of Canada. 14: C-2.
18
Most T. (2007). “A natural neighbour-based moving least-squares approachfor the element-free Galerkin method”. International Journal for Numerical Methods in Engineering. 71: 224-252.
19
Sankaranarayanan, S., and Rao, H. S. (1996). “Finite element analysis of free surface flow through gates”. International Journal for Numerical Methods in Fluids. 22: 375-392
20
Shiraz University. (2007). “Hydraulic model test of bottom outlet of shahryar dam”, Report No. SHM-R-002. Shiraz, Iran
21
Sokoray-Varga, B. and Józsa, J. (2008). “Particle tracking velocimetry (PTV) and its application to analyse free surface flows in laboratory scale models”. Periodica Polytechnica Civil Engineering. 52: 63-71.
22
Vanden-Broek, J. M. (1997). “Numerical calculations of the free surface flow under a sluice gate”. Journal of Fluid Mechanics, Cambridge. U.K.. 330: 339-247.
23
ORIGINAL_ARTICLE
بررسی تحلیلی و آزمایشگاهی ویژگی های پرش هیدرولیکی در بسترهای نفوذپذیر
در این تحقیق اثر نفوذپذیری بستر کانال بر مشخصات پرش هیدرولیکی از دیدگاه تحلیلی و آزمایشگاهی مورد بررسی قرار گرفت. ابتدا با تحلیل معادله اندازه حرکت رابطه ای جهت محاسبه مستقیم نسبت اعماق مزدوج برای بسترهای نفوذپذیر به دست آمد. سپس در آزمایشگاه با استفاده از کانالی به طول 6 متر و عرض 80 سانتی متر آزمایش هایی بر روی بسترهای نفوذپذیر متخلخل با دانه بندی های مختلف و طول و عرض های متفاوت انجام شد. بازه اعداد فرود مورد آزمایش جهت ایجاد پرش پایدار از 5.3 تا 7.4 بود. مشاهده شد که در شرایط نفوذپذیر بودن بستر پرش رابطه تحلیلی نسبت اعماق مزدوج را با دقت بهتری نسبت به رابطه بلانگر تخمین می زند و همچنین وابستگی تغییرات نسبت اعماق مزدوج به تغییرات عدد فرود جریان بیش از وابستگی آن به میزان نفوذپذیری بستر می باشد. نتایج آزمایش ها نشان داد که نفوذپذیری بستر در مجموع سبب کاهش نسبت اعماق مزدوج و طول پرش هیدرولیکی به میزان قابل ملاحظه ای نسبت به بستر صاف نفوذناپذیر شده و افت انرژی ناشی از پرش را نیز افزایش می دهد.
https://jhyd.iha.ir/article_82705_fd63f6e0932f50a21bb2a293f381386b.pdf
2019-01-21
33
42
10.30482/jhyd.2019.82705
پرش هیدرولیکی
معادله اندازه حرکت
بستر نفوذپذیر
نیما
اکبری
nima.akb@gmail.com
1
مهندسی آب، دانشکده کشاورزی، دانشگاه فردوسی مشهد، مشهد، ایران
LEAD_AUTHOR
کاظم
اسماعیلی
kazem.esmaili@gmail.com
2
گروه مهندسی آب دانشگاه فردوسی مشهد
AUTHOR
سعیدرضا
خداشناس
khodashenas@um.ac.ir
3
گروه مهندسی آب، دانشگاه فردوسی مشهد
AUTHOR
بدیع زادگان، ر.، اسماعیلی، ک.، فغفور مغربی، م. و صانعی، م. (1390). مشخصات پرش هیدرولیکی در حوضچههای آرامش کانالهای آبیاری با بستر موجدار. مجله آب و خاک (علوم و صنایع کشاورزی)، 25(3): 676 تا 687.
1
حسینی، م. و ابریشمی، ج. (1378). هیدرولیک کانالهای باز (چاپ هفتم)، موسسه چاپ و انتشارات آستان قدس رضوی، مشهد، ایران.
2
Carollo, F. G., Fero, V. and Pampalone, V. (2007). “Hydraulic Jumps on Rough Beds”. Journal of Hydraulic Engineering, 133(9): 989-999.
3
Ead, S. A., and Rajaratnam, N. (2002). “Hydraulic jumps on corrugated beds”. Journal of Hydraulic Engineering, ASCE, 128(7): 656-663.
4
Izadjoo, F., and Shafai-Bajestan, M. (2007). “Corrugated bed hydraulic jump stilling basin”. Journal of AppliedSciences, 7(8):1164-1169.
5
Rajaratnam, N. (1968). “Hydraulic jumps on rough beds”. Transportation Engineers Institute, Canada, 11(A-2): 1–8.
6
Salehian, S., Shafai-Bajestan, M., Mousavi-Jahromi, H., Kashkooli, H. and Kashefipour, S. M. (2011). “Hydraulic jump characteristics due to natural beds”. World Applies Science Journal, 13(5): 1005-1011.
7
ORIGINAL_ARTICLE
بررسی آزمایشگاهی بهسازی جریان درهم آب در لولهها با استفاده از محلولهای پلیمری
استفاده از غلظتهای کم عوامل کاهندهی درگ نقش مهمی در کاهش تلفات انرژی در خطوط لوله جریان درهم دارد. این مواد با اثرگذاری بر ساختار جریان درهم و بهسازی پروفایلهای سرعت موجب کاهش اصطکاک فشاری جریان درهم میشوند. در این مقاله اثر افزودن غلظتهای مختلف دو کوپلیمر تجاری از پلی آکریل آمید با جرمهای مولکولی مختلف بر کاهش افت فشار جریان درهم آب در خط لوله بررسی شده است. نتایج به دست آمده نشان میدهد که استفاده از این کوپلیمرها به شکل قابل توجهی باعث کاهش افت فشار جریان درهم در طول دو ساعت انجام آزمایش میشود. افزودن ppm30 از پلیمر سنگینتر به جریان درهم 54% کاهش افت فشار بدون تخریب زنجیرهی پلیمر را به همراه دارد. همچنین در این پژوهش تأثیر این عوامل بر پروفایلهای سرعت جریان درهم با سرعت سنج داپلری لیزری بررسی شده است. بر اساس نتایج این پژوهش، در اثر افزودن عامل کاهندهی دراگ پروفایل سرعت از حالت تخت به حالت سهمیگون تمایل پیدا میکند، همچنین منحنیهای تنش رینولدز به شکل قابل توجهی کاهش پیدا میکند. در همهی موارد اثر پلیمر با جرم مولکولی بالاتر بر روی پروفایل سرعت جریان درهم مطلوبتر از پلیمر دیگر ارزیابی میشود.
https://jhyd.iha.ir/article_82706_093f58c371b45e74e6d811f2307937f7.pdf
2019-01-21
43
55
10.30482/jhyd.2019.82706
افت فشار
جریان درهم
پلیمر
سرعت سنجی داپلری لیزری
پروفایل سرعت
حمیدرضا
کرمی
k.hamidreza@gmail.com
1
دانشکده مهندسی شیمی و نفت، دانشگاه رازی، کرمانشاه
AUTHOR
مسعود
رحیمی
m.rahimi@razi.ac.ir
2
عضو هیات علمی/ دانشکده مهندسی نفت و پتروشیمی دانشگاه رازی کرمانشاه / ایران
LEAD_AUTHOR
سعید
اویسی
s.ovaysi@razi.ac.ir
3
عضو هیات علمی گروه مهندسی شیمی، دانشکده مهندسی شیمی و نفت دانشگاه رازی کرمانشاه
AUTHOR
Bizotto, V. C. Sabadini, E. (2008). "Poly(ethylene oxide) × polyacrylamide. Which one is more efficient to promote drag reduction in aqueous solution and less degradable?", J. Appl. Polym. Sci., 110(3), pp. 1844-1850.
1
Blatch, N. S. (1906). "Water Filtration at Washington", Trans. A.S.C.E, 57, pp. 400-408.
2
Boutoudj, M. S. Ouibrahim, A. Barbeu, F. Deslouis, C. Martemianov, S. (2008). "Local shear stress measurements with microelectrodes in turbulent flow of drag reducing surfactant solutions", Chem. Eng. Process., 47(5), pp. 793-798.
3
Choi, H. J. Kim, C. A. Sohn, J.-I. Jhon, M. S. (2000). "An exponential decay function for polymer degradation in turbulent drag reduction", Polym. Degrad. Stab., 69(3), pp. 341-346.
4
De Gennes, P. (1986). "Towards a scaling theory of drag reduction", Physica A, 140(1-2), pp. 9-25.
5
Edomwonyi-Otu, L. Chinaud, M. Angeli, P. (2015). "Effect of drag reducing polymer on horizontal liquid–liquid flows", Exp. Therm Fluid Sci., 64, pp. 164-174.
6
Eshrati, M. Al-Hashmi, A. Al-Wahaibi, T. Al-Wahaibi, Y. Al-Ajmi, A. Abubakar, A. (2015). "Drag reduction using high molecular weight polyacrylamides during multiphase flow of oil and water: a parametric study", J. Pet. Sci. Eng., 135, pp. 403-409.
7
Guan, X.-L. Yao, S.-Y. Jiang, N. (2013). "A study on coherent structures and drag-reduction in the wall turbulence with polymer additives by TRPIV", Acta Mech. Sin., 29(4), pp. 485-493.
8
Hong, C. H. Choi, H. J. Zhang, K. Renou, F. Grisel, M. (2015). "Effect of salt on turbulent drag reduction of xanthan gum", Carbohydr. Polym., 121, pp. 342-347.
9
Japper-Jaafar, A. Escudier, M. P. Poole, R. J. (2009). "Turbulent pipe flow of a drag-reducing rigid “rod-like” polymer solution", J. Non-Newtonian Fluid Mech., 161(1–3), pp. 86-93.
10
Kähler, C. J. Scharnowski, S. Cierpka, C. (2012). "On the uncertainty of digital PIV and PTV near walls", Exp. Fluids, 52(6), pp. 1641-1656.
11
Karami, H. R. Mowla, D. (2012). "Investigation of the effects of various parameters on pressure drop reduction in crude oil pipelines by drag reducing agents", J. Non-Newtonian Fluid Mech., 177–178, pp. 37-45.
12
Karami, H. R. Mowla, D. (2013). "A general model for predicting drag reduction in crude oil pipelines", J. Pet. Sci. Eng., 111, pp. 78-86.
13
Karami, H. R. Keyhani, M. Mowla, D. (2016). "Experimental analysis of drag reduction in the pipelines with response surface methodology", J. Pet. Sci. Eng., 138, pp. 104-112.
14
Karami, H. R. Rahimi, M. Ovaysi, S. (2018a). "Degradation of drag reducing polymers in aqueous solutions", Korean J. Chem. Eng., pp. 1-10.
15
Karami, H. R. Rahimi, M. Ovaysi, S. (2018b). "Modification of Turbulent Flow Velocity Profiles Using Small Concentrations of Diluted Polymeric Solution ", The 10th International Chemical Engineering Congress & Exhibition (IChEC 2018) Isfahan, Iran, pp.
16
Kim, C. A. Kim, J. T. Lee, K. Choi, H. J. Jhon, M. S. (2000). "Mechanical degradation of dilute polymer solutions under turbulent flow", Polymer, 41(21), pp. 7611-7615.
17
Kim, K. Islam, M. Shen, X. Sirviente, A. Solomon, M. (2004). "Effect of macromolecular polymer structures on drag reduction in a turbulent channel flow", Phys. Fluids, 16(11), pp. 4150-4162.
18
Li, C.-F. Sureshkumar, R. Khomami, B. (2006). "Influence of rheological parameters on polymer induced turbulent drag reduction", J. Non-Newtonian Fluid Mech., 140(1–3), pp. 23-40.
19
Lumley, J. L. (1969). "Drag reduction by additives", Annu. Rev. Fluid Mech., 1(1), pp. 367-384.
20
Manzhai, V. N. Nasibullina, Y. R. Kuchevskaya, A. S. Filimoshkin, A. G. (2014). "Physico-chemical concept of drag reduction nature in dilute polymer solutions (the Toms effect)", Chem. Eng. Process., 80, pp. 38-42.
21
Pereira, A. S. Soares, E. J. (2012). "Polymer degradation of dilute solutions in turbulent drag reducing flows in a cylindrical double gap rheometer device", J. Non-Newtonian Fluid Mech., 179–180, pp. 9-22.
22
Pereira, A. S. Andrade, R. M. Soares, E. J. (2013). "Drag reduction induced by flexible and rigid molecules in a turbulent flow into a rotating cylindrical double gap device: Comparison between Poly (ethylene oxide), Polyacrylamide, and Xanthan Gum", J. Non-Newtonian Fluid Mech., 202, pp. 72-87.
23
Pinho, F. T. Li, C. F. Younis, B. A. Sureshkumar, R. (2008). "A low Reynolds number turbulence closure for viscoelastic fluids", J. Non-Newtonian Fluid Mech., 154(2), pp. 89-108.
24
Ptasinski, P. Nieuwstadt, F. Van Den Brule, B. Hulsen, M. (2001). "Experiments in turbulent pipe flow with polymer additives at maximum drag reduction", Flow Turbul. Combust., 66(2), pp. 159-182.
25
Rahimi, M. Akbari, M. H. Karami, H. R. (2015). "Investigation of drag reduction in microtube", paper presented at The 9th International Chemical Engineering Congress & Exhibition (IChEC 2015)At: Shiraz, Iran.
26
Reis, L. G. Oliveira, I. P. Pires, R. V. Lucas, E. F. (2016). "Influence of structure and composition of poly(acrylamide-g-propylene oxide) copolymers on drag reduction of aqueous dispersions", Colloids Surf., A, 502, pp. 121-129.
27
Sandoval, G. A. B. Soares, E. J. (2016). "Effect of combined polymers on the loss of efficiency caused by mechanical degradation in drag reducing flows through straight tubes", Rheol. Acta, 55(7), pp. 559-569.
28
Sohn, J. I. Kim, C. A. Choi, H. J. Jhon, M. S. (2001). "Drag-reduction effectiveness of xanthan gum in a rotating disk apparatus", Carbohydr. Polym., 45(1), pp. 61-68.
29
Tian, H. Zhang, J. Wang, E. Yao, Z. Jiang, N. (2015). "Experimental investigation on drag reduction in turbulent boundary layer over superhydrophobic surface by TRPIV", Theor. Appl. Mech. Lett., 5(1), pp. 45-49.
30
Toms, B. A. (1949). "Some observations on the flow of linear polymer solutions through straight tubes at large Reynolds numbers", Proc. of the International Congress on Rheology, pp. 135-141.
31
Virk, P. S. (1975). "Drag reduction fundamentals", AlChE J., 21(4), pp. 625-656.
32
Werther, J. Hage, B. Rudnick, C. (1996). "A comparison of laser Doppler and single-fibre reflection probes for the measurement of the velocity of solids in a gas-solid circulating fluidized bed", Chem. Eng. Process., 35(5), pp. 381-391.
33
White, C. M. Mungal, M. G. (2008). "Mechanics and Prediction of Turbulent Drag Reduction with Polymer Additives", Annu. Rev. Fluid Mech., 40(1), pp. 235-256.
34
White, C. M. Mungal, M. G. (2008). "Mechanics and prediction of turbulent drag reduction with polymer additives", Annu. Rev. Fluid Mech., 40, pp. 235-256.
35
Wyatt, N. B. Gunther, C. M. Liberatore, M. W. (2011). "Drag reduction effectiveness of dilute and entangled xanthan in turbulent pipe flow", J. Non-Newtonian Fluid Mech., 166(1–2), pp. 25-31.
36
Xueming, S. Jianzhong, L. Tao, W. Yulin, L. (2002). "Experimental research on drag reduction by polymer additives in a turbulent pipe flow", Can. J. Chem. Eng., 80(2), pp. 293-298.
37
ORIGINAL_ARTICLE
اثر جت هیدرولیکی هم فاز بر کاهش آبشستگی در قوس 180 درجه رودخانهها
در این تحقیق اثر جت هیدرولیکی هم فاز بر کاهش آبشستگی در قوس رودخانه ها بررسی شد. در روش مورد نظر یک لوله روزنه دار در امتداد قوس و نزدیک به دیواره بیرونی روی بستر قرار گرفته و از دو انتهای لوله فشار آب، به جریان درون قوس تزریق می شود. هدف اصلی از این پژوهش ایجاد یک صفحه آبی در مقابله با جریان ثانویة ایجاد شده در قوس و ممانعت از رسیدن آن به ساحل خارجی می باشد. نتایج نشان داد، محل وقوع ماکزیمم عمق آبشستگی آزمایش های شاهد از نزدیکی دیواره خارجی قوس به میانههای مقطع عرضی در آزمایش های اصلی انتقال یافت. از طرفی میزان ماکزیمم عمق آبشستگی با افزایش فاصله روزنه های روی لوله کاهش یافت. همچنین میزان ماکزیمم عمق آبشستگی، با کاهش فاصله لوله از دیواره خارجی قوس کاهش یافت. از سوی دیگر نتایج نشان داد که میزان ماکزیمم اعماق آبشستگی برای مقاطع 90، 130 و 175 درجه قوس به ترتیب به میزان 60، 64 و 87 درصد کاهش یافت.
https://jhyd.iha.ir/article_82711_7837d272ce06bfeb27a6fb761f8db2ae.pdf
2019-01-21
57
68
10.30482/jhyd.2019.82711
جت هیدرولیکی هم فاز
قوس رودخانه ها
عمق آبشستگی
زینب
تامرادی
ztamoradi6@gmail.com
1
دانشکده مهندسی، گروه عمران، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران
AUTHOR
جواد
احدیان
ja.ahadiyan@gmail.com
2
عضو هیئت علمی گروه سازه های آبی، دانشکده مهندسی علوم آب، دانشگاه شهید چمران، اهواز، ایران.
LEAD_AUTHOR
محسن
نجارچی
m-najarchi@iau-arak.ac.ir
3
دانشکده مهندسی، گروه عمران، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران
AUTHOR
هوشنک
حسونی زاده
hassoni44@hotmail.com
4
معاون مطالعات پایه و طرح های جامع منابع آب، سازمان آب و برق خوزستان، اهواز، ایران
AUTHOR
محمد مهدی
نجفی زاده
m-najafizadeh@iau-arak.ac.ir
5
دانشکده مهندسی، گروه مکانیک، واحد اراک، دانشگاه آزاد اسلامی، اراک، ایران
AUTHOR
جراح زاده، ف. و شفاعی بجستان، م. (1391). "بررسی آزمایشگاهی وضعیت خط القعر تحت تاثیر وجود سرریز مستغرق درخم 90 درجه تند"، فصلنامه پژوهشهای آبخیزداری )پژوهش و سازندگی(، 97: ص.ص. 29-17.
1
شهابی، م. (1394). "بررسی آزمایشگاهی اثر نفوذپذیری و فاصله بر روی ابعاد آبشستگی اطراف آبشکنهای نفوذپذیر در قوس 90 درجه ملایم"، پایان نامه کارشناسی ارشد، دانشکده مهندسی علوم آب، دانشگاه شهید چمران اهواز.
2
Blanckaert, K. Buschman, FA. Schielen, R. and Wijbenga, JHA. (2008). "Redistribution of velocity and bed-shear stress in straight and curved open channels by means of a bubble screen: Laboratory experiments". J. Hydraulic Eng-ASCE. 134(2), pp. 184-195.
3
Dugué, V. Blanckaert, K. and Schleiss, A. (2011). "Influencing bend morphodynamics by means of an air-bubble screen-Topography and velocity field". Proc. of 7th IAHR Symposium on River, Costal and Estuarine Morphodynamics RCEM2011).
4
Dugué, V. Schleiss, A. and Blanckaert, K. (2012). "Bend scour reduction induced by an air-bubble screen under live-bed conditions". Proc. of the International conference on fluvial Hydraulics.
5
Dugué, V. Blanckaert, K. and Schleiss, A. (2012a). "An Air-Bubble Screen Used as a countermeasure to Reduce Erosion in Open-Channel bends". Proc. of 6th International Conference on Scour and Erosion., Paris, france. pp. 519-529.
6
Dugué, V. Blanckaert, K. and Schleiss, A. (2012b). "Flow patterns induced by a bubble screen in a sharply curved flume based on Acoustic Doppler Velocity Profiler measurements". Proc. of 8th International Symposium on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering. Dresden., Germany. pp. 29-32.
7
Dugué, V. Blanckaert, K. Qiuwen, CH. and Schleiss, A. (2013). "Reduction of bend scour with an airbubble screen: Morphology and flow patterns". J. Sediment Research. 28(1), pp. 15-23.
8
Dugué, V. Blanckaert, K. Chen, Q. and Schleiss, A. (2014). "Influencing Flow Patterns and Bed Morphology in Open Channels and Rivers by Means of an Air-Bubble Screen". J. Hydraulic Eng-ASCE. 141(2), 04014070.
9
Dey, L. Barbhuiya, AK. and Biswas, P. (2017). "Experimental study on bank erosion and protection using submerged vane placed at an optimum angle in a 180° laboratory channel bend". J. Geomorphology. 283, pp. 32-40.
10
Ghobadian, R. and Mohammadi, K. (2011). "Simulation of subcritical flow pattern in 180 uniform and convergent open-channel bends using SSIIM 3-D model". J. Water Science and Engineering. 4(3), pp. 270-283.
11
Karbasi, M. and Azamathulla, H. M. (2017). "Prediction of scour caused by 2D horizontal jets using soft computing techniques". J. Ain Shams Engineering. 8(4), pp. 559-570.
12
Nath, D. and Misra, UK. (2017). "Experimental Study of Local Scour around Single Spur Dike in an Open Channel".
13
Soltani-Gerdefaramarzi, S. Afzalimehr, H. Chiew, YM. and Lai, JS. (2013). "Jet to control scour around circular bridge piers". J. Civil Engineering. 40(3), pp. 204-212.
14
Wijbenga, JHA. Schielen, R. Blanckaert, K. and Buschman, F. (2006). "Secondary flow and velocity redistribution by bubble screens in open channel bends". The International Conference on Fluvial Hydraulics. Lisbon., Portugal. p. 173.
15
Yarahmadi, MB. And Bejestan, MS. (2016). "Sediment management and flow patterns at river bend due to triangular vanes attached to the bank". J. Hydro-environment Research. 10, pp. 64-75.
16
ORIGINAL_ARTICLE
بررسی رفتار آشفتگی جریان گذرا در لوله ها با حضور نشت
روشهای روندیابی نشت از راه دور در لولههای پرفشار، بر پایه تحلیل نوسانات فشاری ایجاد شده طی جریان گذرا میباشند. از این رو مطالعه و درک جریانهای گذرا میتواند منجر به بهبود کاربردهای عملی جریان گذرا به عنوان یک منبع اطلاعاتی و به طور همزمان کاهش اثرات مخرب این دسته از جریانها بر خط لوله و نیز تجهیزات متصل به آن شود. بدین منظور در مقاله حاضر تلاش شده است با مدل سازی جریان گذرا با وجود نشت به صورت دوبعدی، رفتار جریان و نیز پارامترهای آشفتگی در سیکلهای مختلف جریان گذرا تحلیل شوند. مدل عددی پیشنهادی برپایه طرح تفاضل محدود بوده و در آن برای از بین بردن پراکندگی عددی از روش انتقال شار تصحیح شده استفاده شده است. به منظور مطالعه رفتار آشفتگی در جریان و استهلاک انرژی ناشی از آن، مدل آشفتگی k-ω به مدل دوبعدی جریان گذرا کوپل شده و اثر نشت نیز به مدل دوبعدی جریان گذرا در دو قسمت ماندگار و ناماندگار مدل اضافه شده است. با حضور نشت در جریان گذرا، تغییر قابل توجهی در رفتار پروفیل سرعت و پارامترهای آشفتگی در سیکلهای رفت و برگشتی جریان مشاهده میشود. در سیکلهای اولیه جریان گذرا مقادیر پارامترهای مختلف در بالادست نشت به مرور کاهش و در پایین دست آن افزایش اندکی خواهد داشت تا زمانی که این دو جریان با هم به تعادل برسند از آن پس آشفتگی از کنارههای جداره شروع به گسترش در لایههای میانی کرده و با سپری شدن زمان، بزرگی آن کاهش مییابد.
https://jhyd.iha.ir/article_82708_54b5bf012cb5d670c1706d62d863f577.pdf
2019-01-21
69
80
10.30482/jhyd.2019.82708
آشفتگی
ویسکوالاستیسیته
جریان گذرا
نشت
سیده مریم
موسوی فرد
mousavifard@fasau.ac.ir
1
مهندسی عمران، دانشکده مهندسی، دانشگاه فسا، فسا، ایران
LEAD_AUTHOR
حمید
شاملو
hshamloo@kntu.ac.ir
2
دانشکده مهندسی عمران، دانشگاه صنعتی خواجه نصیر الدین طوسی، تهران، ایران
AUTHOR
Book, D. L., Boris, J. P. and Hain, K. (1975). “Flux-corrected transport II: Generalizations of the methodˮ. J. Computational Physics 18, pp. 248–283. https://doi.org/10.1016/0021-9991(75)90002-9
1
Brunone, B. and Berni, A. (2010). “Wall shear stress in transient turbulent pipe flow by local velocity measurementˮ. J. Hydraulic Eng. 136, pp. 716–726. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000234
2
Brunone, B., Karney, B. W., Mecarelli, M., and Ferrante, M. (2000). “Velocity profiles and unsteady pipe friction in transient flowˮ. J. Water Resources Planning and Management 126, pp. 236–244. https://doi.org/10.1061/(ASCE)0733-9496(2000)126:4(236)
3
Covas, D. and Ramos, H. (2010). “Case studies of leak detection and location in water pipe systems by inverse transient analysisˮ. J. Water Resources Planning and Management. 136, pp. 248–257. https://doi.org/10.1061/(ASCE)0733-9496(2010)136:2(248)
4
Covas, D., Stoianov, I., Mano, J. F., Ramos, H., Graham, N., Maksimovic, C., (2005). “The dynamic effect of pipe-wall viscoelasticity in hydraulic transients. Part II—model development, calibration and verificationˮ. J. Hydraulic Research 43, pp. 56–70. https://doi.org/10.1080/00221680509500111
5
Covas, D., Stoianov, I., Ramos, H., Graham, N. and Maksimovic, C. (2004a). “The dynamic effect of pipe-wall viscoelasticity in hydraulic transients. Part I—experimental analysis and creep characterizationˮ. J. Hydraulic Research 42, pp. 517–532. https://doi.org/10.1080/00221686.2004.9641221
6
Covas, D., Stoianov, I., Ramos, H., Graham, N., Maksimović, Č., and Butler, D. (2004b). “Water hammer in pressurized polyethylene pipes: conceptual model and experimental analysisˮ. Urban Water Journal 1, 177–197. https://doi.org/10.1080/15730620412331289977
7
Duan, H. -F., Ghidaoui, M., Lee, P. J. and Tung, Y. -K. (2010). “Unsteady friction and visco-elasticity in pipe fluid transientsˮ. J. Hydraulic Research 48, pp. 354–362. https://doi.org/10.1080/00221681003726247
8
Fan, S., Lakshminarayana, B. and Barnett, M. (1993). “Low-Reynolds-number k-epsilon model for unsteady turbulent boundary-layer flowsˮ. AIAA Journal. 31, pp. 1777–1784.
9
https://doi.org/10.2514/3.11849
10
Ghidaoui, M. S., Zhao, M., McInnis, D. A. and Axworthy, D. H. (2005). “A review of water hammer theory and practiceˮ. Applied Mechanics Reviews 58, pp. 49–76.
11
https://doi.org/10.1115/1.1828050
12
Guney, M. (1983). “Water hammer in viscoelastic pipes where cross-section parameters are time dependentˮ. Presented at the 4th International Conference on Pressure Surges, BHRA Fluid Engineering, 1983, England.
13
Keramat, A., Kolahi, A. G. and Ahmadi, A. (2013). “Water hammer modelling of viscoelastic pipes with a time-dependent Poisson’s ratioˮ. J. Fluids and Structures. 43, pp. 164–178.
14
https://doi.org/10.1016/j.jfluidstructs.2013.08.013
15
Keramat, A., Tijsseling, A. S., Hou, Q. and Ahmadi, A. (2012). “Fluid–structure interaction with pipe-wall viscoelasticity during water hammerˮ. J. Fluids and Structures. 28, pp. 434–455. https://doi.org/10.1016/j.jfluidstructs.2011.11.001
16
Mahdizadeh, H. (2018). “Numerical modelling of one- and two-dimensional water hammer problems using a modified wave propagation algorithm and turbulence modelˮ. J. Hydraulic Research. 0, pp. 1–12. https://doi.org/10.1080/00221686.2018.1459897
17
Mitra, A. K. and Rouleau, W. T. (1985). “Radial and axial variations in transient pressure waves transmitted through liquid transmission linesˮ. J. Fluids Engineering. 107, pp. 105–111. https://doi.org/10.1115/1.3242423
18
Pezzinga, G. (1999). “Quasi-2D model for unsteady flow in pipe networks ˮ. J. Hydraulic Eng. 125, pp. 676–685.
19
https://doi.org/10.1061/(ASCE)0733-9429 (1999) 125:7(676)
20
Pezzinga, G., Brunone, B., Cannizzaro, D., Ferrante, M., Meniconi, S. and Berni, A. (2014). “Two-dimensional features of viscoelastic models of pipe transientsˮ. J. Hydraulic Eng. 140, 04014036. https://doi.org/10.1061/(ASCE)HY.1943-7900.0000891
21
Pezzinga, G., Brunone, B. and Meniconi, S. (2016). “Relevance of pipe period on kelvin-voigt viscoelastic parameters: 1D and 2D inverse transient analysisˮ. J. Hydraulic Eng. 142, 04016063. https://doi.org/10.1061/(ASCE)HY. 1943-7900.0001216
22
Riasi, A., Nourbakhsh, A. and Raisee, M. (2013). “Energy dissipation in unsteady turbulent pipe flows caused by water hammerˮ. Computers & Fluids. 73, pp. 124–133. https://doi.org/10.1016/ j.compfluid.2012.12.015
23
Riasi, A., Nourbakhsh, A. and Raisee, M. (2009a). “Unsteady velocity profiles in laminar and turbulent water hammer flowsˮ. J. Fluids Eng. 131, 121202-121202–8. https://doi.org/10.1115/1.4000557
24
Riasi, A., Nourbakhsh, P. A. and Raisee, M. (2009b). “Unsteady turbulent pipe flow due to water hammer using k–θ turbulence modelˮ. J. Hydraulic Research. 47, pp. 429–437.
25
https://doi.org/10.1080/00221686.2009.9522018
26
Saemi, S., Raisee, M., Cervantes, M. J. and Nourbakhsh, A. (2018). “Computation of two- and three-dimensional water hammer flowsˮ. J. Hydraulic Research. 0, pp. 1–19.
27
https://doi.org/10.1080/00221686.2018.1459892
28
Shamloo, H. and Mousavifard, M. (2015). “Numerical simulation of turbulent pipe flow for water hammerˮ. J. Fluids Eng. 137, 111203-111203–10. https://doi.org/10.1115/1.4030806
29
Silva-Araya, W. F. and Chaudhry, M. H. (1997). “Computation of energy dissipation in transient flowˮ. J. Hydraulic Eng 123, pp. 108–115. https://doi.org/10.1061/(ASCE)0733-9429(1997)123:2(108)
30
Soares, A. K., Covas, D. I. and Reis, L. F. (2008). “Analysis of PVC pipe-wall viscoelasticity during water hammerˮ. J. Hydraulic Eng. 134, pp. 1389–1394. https://doi.org/10.1061/(ASCE)0733-9429 (2008)134:9(1389)
31
Vardy, A. E., Hwang, K. -L. (1991). “A characteristics model of transient friction in pipesˮ. J. Hydraulic Research. 29, pp. 669–684.
32
https://doi.org/10.1080/00221689109498983
33
Wahba, E. M. (2009). “Turbulence modeling for two-dimensional water hammer simulations in the low Reynolds number rangeˮ. Computers & Fluids. 38, pp. 1763–1770. https://doi.org/10.1016/j. compfluid.2009.03.007
34
Wilcox, D. C. (1994). Turbulence modeling for CFD. La Canada, CA: DCW Industries.
35
Workman, L. (1988). Characteristics of PVC pipe. Philips Industries, Inc.
36
Zhao, M. and Ghidaoui, M. S. (2006). “Investigation of turbulence behavior in pipe transient using a k–∊ modelˮ. J. Hydraulic Research 44, pp. 682–692. https://doi.org/10.1080/ 00221686.2006.9521717
37
Zhao, M. and Ghidaoui, M. S. (2003). “Efficient quasi-two-dimensional model for water hammer problemsˮ. J. Hydraulic Eng. 129, pp. 1007–1013. https://doi.org/10.1061/(ASCE)0733-9429(2003) 129:12(1007)
38
ORIGINAL_ARTICLE
بررسی آزمایشگاهی تاثیر پساب تصفیهشده شهری بر فرآیند تهنشینی و تحکیم رسوبات چسبنده در سامانههای انتقال آب
تحکیم رسوبات چسبنده نقش موثری در مقادیر تنشبرشی بحرانی فرسایش رسوبات تهنشین شده در مخازن و کانالهای انتقال آب دارد. آگاهی یافتن از رفتار رسوبات ریزدانه میتواند تاثیر بسزایی در بهرهبرداری و نگهداری سازههای آبی داشته باشد. از این رو در این تحقیق به بررسی تاثیر پساب شهری، که در شرایط خشکسالی به عنوان منابع آب تجدید پذیر مورد استفاده قرار میگیرد، بر تهنشینی و تحکیم رسوبات چسبنده در سامانههای انتقال پرداخته شده است. به همین منظور مراحل تحکیم رسوبات در چهار بازه زمانی 1، 3، 14 و 28 روز و با استفاده از ستونهای تهنشینی و برای سه غلظت 0، 30 و 60 درصد پساب و سه غلظت اولیه رسوب 200، 300 و 400 گرم بر لیتر انجام شد. نتایج نشان داد با افزایش غلظت اولیه، عمق تهنشینی رسوبات (H/H0) نیز افزایش مییابد و غلظت اولیه رسوبات تا 300 گرم بر لیتر بر فرآیند تحکیم تاثیر گذار است؛ به طوری که تفاوت چندانی بین غلظت اولیه 300 تا 400 گرم بر لیتر مشاهده نمیشود. همچنین مشخص شد مراحل تحکیم در آب خالص و سیال حاوی 60 درصد پساب بسیار نزدیک به هم است اما در سیال حاوی 30 درصد پساب رفتار متفاوتی نشان میدهد. با بررسی درصد سدیم قابل تبادل (ESP) برای درصدهای مختلف پساب و در پایان تحکیم 28 روز مشخص شد که روند تغییرات H/H0 برای درصدهای مختلف پساب با تغییرات شاخص پخشیدگی ESP یکسان است. علت پدیده پراکنش در سیال حاوی 30 درصد پساب را میتوان با خصوصیات شیمیایی سیال و جانشینی کلسیم به جای یون سدیم در ذرات رسی توجیه نمود.
https://jhyd.iha.ir/article_82709_cecd49f6b2b98ac5de539211a73a0e34.pdf
2019-01-21
81
92
10.30482/jhyd.2019.82709
تحکیم
شاخص ESP
رسوبات چسبنده
پساب
زهرا
طاهری
sahra_taheri65@yahoo.com
1
دانشگاه فردوسی مشهد
AUTHOR
کاظم
اسماعیلی
esmaili@um.ac.ir
2
هیات علمی
LEAD_AUTHOR
حسین
صمدی بروجنی
samadi153@yahoo.com
3
عضو هیات علمی دانشگاه شهرکرد
AUTHOR
سعید رضا
خداشناس
khodashenas@um.ac.ir
4
عضو هیات علمی- استاد
AUTHOR
[1] علیزاده، ا. (1383). زهکشی اراضی (چاپ ششم)، انتشارات دانشگاه فردوسی مشهد، مشهد.
1
[2] وجدانی، ن. و قمشی، م. (1385). "تنشبرشی بحرانی فرسایش رسوبات چسبنده و نقش آن در طراحی کانالهای باز". همایش ملی مدیریت شبکههای آبیاری و زهکشی، دانشگاه شهید چمران اهواز.
2
[3] Amelia, V.C.M. Teixeira, C.F.J. and Senhorinha. (2010). “Physical characterization of estuarine sediments in the northern coast of Portugal”. Journal of Coastal Research, 26.2: 301-311
3
[4] Bloomquist, D.G. and Townsend, F.C. (1984). “Centrifugal modeling of phosphatic clay consolidation”. ASCE Symposium on Sedimentation/Consolidation Models, San Francisco.
4
[5] Carrier, W.D. and Bromwell, L.G. (1983). “Disposal and Reclamation of Mining and Dredging Wastes”. Proceedings of the Seventh Panamerican Conference on Soil Mechanics and Foundation Engineering, Vancouver, Canada.
5
[6] Coe, H.S. and Clevenger, G.H. (1916). “Mtthods for determining the capacities of slimes settling tanks”. Transactions of the American Institute of Mining Engineers, 55: 356-384.
6
[7] Diplas, P. and Papanicolaou, A.N. (1997). “Batch analysis of slurries in zone settling regime”. Journal of Envirnomental Engineering, ASCE, 123(7): 659-667.
7
[8] Edward, L. and Bentley, S.J. (2014). “Experimental study of cohesive sediment consolidation and resuspension identifies approaches for coastal restoration: Lake Lery, Louisiana”. Geo Marine Letters.
8
[9] Fedrico M. (2005). “Flocculation dynamics of cohesive sediment”. Communications on Hydraulic and Geotechnical Engineering' of the Faculty of Civil Engineering and Geosciences, Delft University of Technology.
9
[10] Fitch, B. (1962). “Sedimentation process fandamentals”. Transactions of the American Institute of Mining Engineers. 55: 129-137.
10
[11] Holdic, R.H. and Butt, G. (1995). “An experimental study of channeling and soild concentration during the batch sedimentation of calcite suspension”. Transactions of the Institution of Chemical Engineering, 73(7): 833-841.
11
[12] Holdic, R.H. and Butt, G. (1996). Compression and channeling in gravity sedimenting systems”. Minerals Engineering, 9: 115-131.
12
[13] Huang, J., Hilldate, R.C., Greiman, B.P. (2006). “Erosion and sedimentation manual”. U.S. Department of the interior. United States Bureau of Reclamation.
13
[14] Krizek, R.J. and Somogyi, F. (1984). “Perspective on modeling consolidation of dredged materials”. ASCE Symposium on Sedimentation/Consolidation Models, San Francisco.
14
[15] Lambe, T.W. and Whitman, R.V. (1979). “Soil mechanics”. SI version. John Wiley and Sons, New York.
15
[16] Milburn, D. and Krishnappan, B.G. (2001). “Modeling erosion and deposition of cohesive sediment from Hay River”. Northwest Territories, Canada. Paper presented at the 13th Northern Res. Basins/Workshop, Aug. 19-24.
16
[17] Morris, G.L. and Fan, J. (1998). “Reservoir Sedimentation Handbook”. McGraw-Hill Pub., New York.
17
[18] Partheniades, E. (2009). “Cohesive Sediments in Open Channels”. (1st Ed), Elsevier Inc,Burligton, USA.
18
[19] Samadi-Boroujeni, H. (2004). “Modelling of Sedimentation/consolidation of cohesive sediments”. Ph.D. Thesis, Shahid Chamran University, Iran.
19
[20] Schiffman, R.L. Pane, V. and Gibson, R.E. (1984). “An overview of nonlinear finite strain sedimentation and consolidation”. ASCE Symposium on Sedimentation/ Consolidation Models, San Francisco.
20
[21] Tunguy, J.M. and Rouas, G. (1995). “Physical and Numerical Modeling of Settling and Consolidation of Cohesive Sediments in Calm Water”. Proceeding of Sixth Int. Symposium on River Sedimentation, New Delhi.
21
ORIGINAL_ARTICLE
معرفی و بررسی کارایی الگوریتمهای مختلف پردازش تصویر در تعیین زبری هیدرولیکی به کمک منحنی دانهبندی در رودخانههای بستر شنی
اهمیت و نقش زبری بستر در مدلهای شبیهسازی رودخانه بر هیچ یک از متخصصان این حوزه پوشیده نیست. براین اساس، محققان برای تعیین اندازه زبری ذرات بستر، از روشهای سادهای چون اندازهگیری مستقیم با خطکش یا کولیس یا دانهبندی با الک تا سالیان متمادی استفاده میکردند. در سالیان اخیر با پیشرفت تکنولوژی و ترویج دوربینهای عکاسی دیجیتال، الگوریتمها و نرمافزارهای مختلفی برای تجزیه و تحلیل خودکار اطلاعات بستر با استفاده از تصاویر دیجیتالی اخذ شده از بستر آبراههها ارائه شدهاند، لکن تاکنون در خصوص مقایسه نتایج روشهای مختلف و صحتسنجی آنها به صورت تطبیقی مطالعهای صورت نگرفته و صرفاً محققان مختلف بر روی شکل ظاهری منحنی دانهبندی و نیز قطرهای شاخص ذرات ارزیابی و اظهارنظر کردهاند. در این مطالعه، به منظور بررسی قابلیت روش فتوگرامتری در تعیین منحنی دانهبندی و زبری بستر، تصویربرداری از بازهای یک کیلومتری از بستر رودخانه کردانِ استان البرز صورت گرفت و منحنی دانه بندی به کمک روش پردازش تصویر با 3 الگوریتم پردازش تصویر مختلف استخراج گردید. در ادامه منحنی دانه بندی حاصله، با منحنی دانه بندی حاصل از آزمایش الکِ مصالح جمع آوری شده از محل بازدید و منحنی دانه بندی حاصله از ذرات جمعآوری شده از بستر در داخل آزمایشگاه مقایسه گردیده شد. بر اساس نتایج حاصله میتوان گفت که ارائه منحنی دانهبندی قابل قبول، به معنی دقت خوب روشهای تصویری نیست و این روشها بعضاً در شمارش ذرات دارای خطای فاحشی هستند که با کوچک شدن میدان تصویر یا افزایش تعداد ذرات ریزدانه داخل تصویر یا وجود ذرات دارای کشیدگی طولی، این خطا محسوس و غیرقابل اغماض خواهد بود. همچنین آنالیز حساسیت روی ضریب زبری، نشان داد که خطا در برآورد منحنی دانهبندی میتواند موجب خطای غیرقابل اغماض روی ضریب زبری گردد. لذا استفاده از این روشها در تخمین زبری هیدرولیکی بایستی با دقت کافی صورت گیرد.
https://jhyd.iha.ir/article_82710_ae1f838fcb58cd2a794cfba812bafcfb.pdf
2019-01-21
93
110
10.30482/jhyd.2019.82710
زبری بستر
رودخانه شنی
منحنی دانهبندی
آنالیز خطا
نرمافزارهای پردازش تصویر
مهدیس
زارعی
mahdis.zarei@gmail.com
1
دانشگاه بین المللی امام خمینی(ره)
AUTHOR
امیر
صمدی
amsamadi@gmail.com
2
استادیار گروه مهندسی آب دانشگاه بین المللی امام خمینی(ره)
LEAD_AUTHOR
سیدحسین
مهاجری
hossein.mohajeri@gmail.com
3
عضو هیات علمی دانشگاه خوارزمی
AUTHOR
حسننژاد شریفی، ف.، صمدی، ا.، عزیزیان قطار، ا. (a1395) "ارزیابی عملکرد روش پردازش تصویر در تخمین ضریب زبری مانینگ در لایه سطحی بستر رودخانهها". مجله تحقیقات آب و خاک ایران. 47 (4): 722- 711.
1
حسننژاد شریفی، ف.، صمدی، ا.، عزیزیان قطار، ا. (b1395). "تحلیل حساسیت روش پردازش تصاویر در برآورد منحنی دانهبندی رسوبات سطحی بستر رودخانه نسبت به اندازه سطح رسوبی". مجله پژوهش آب ایران. 23: 142- 133.
2
زارعی، م.، مهاجری، س. ح.، صمدی، ا. (1396). "ارزیابی نتایج روشهای مختلف پردازش تصویر برای تهیه منحنی دانهبندی بستر آبراهههای شنی". شانزدهمین کنفرانس هیدرولیک ایران، دانشگاه محقق اردبیلی، اردبیل، ایران.
3
صادقی، س.ح. و قرهمحمودلی، س. (1392). "تحلیل دقت دانهبندی رسوبات بستر با استفاده از پردازش تصاویر حاصل از دوربینهای با قدرت تفکیک مختلف". نشریه علمی- پژوهشی مهندسی و مدیریت آبخیز. 5 (2): 124- 115.
4
صمدی، ا. و عزیزیان، ا. (1394). "ارزیابی اثر توان تفکیکهای مختلف تصویر بر نحوه استخراج منحنی دانهبندی مصالح سطحی بستر رودخانه به روش پردازش تصویر". نخستین کنگره ملی آبیاری و زهکشی ایران. دانشگاه فردوسی مشهد. مشهد. ایران. 23-24 اردیبهشت.
5
عبد شریف اصفهانی، م.، کرباسی، م.، رجبی هشجین، م. و کیاسالاری، ا. (1384). "معرفی روش عکسبرداری شبکهای از بستر رودخانه در تعیین دانهبندی لایه محافظ یک بستر درشتدانه (مطالعه موردی: رودخانه کرج)". پنجمینکنفرانس هیدرولیک ایران. دانشگاه شهید باهنر. کرمان. 19- 17 آبان.
6
عزیزیان، ا.، مرشدی، ف. و آرین، ا. (1391). "استفاده از تکنیک پردازش تصویر جهت استخراج منحنی دانهبندی مصالح سطحی بستر رودخانه". نهمین سمینار بینالمللی مهندسی رودخانه. دانشگاه شهید چمران. اهواز. ایران. 5- 3 بهمن.
7
سازمان مدیریت و برنامهریزی کشور. (1394). راهنمای تعیین ضریب زبری هیدرولیکی رودخانهها، نشریه شماره 688، سازمان مدیریت و برنامهریزی کشور.
8
Adams, R.D. (2013). “Tool for Automated Image Based Grain Sizing”, MSc Thesis, Department of Civil and Environmental Engineering, Brigham Young University.
9
American Society for Testing and Materials (ASTM). (2006). “Standard test method for sieve analysis of fine and coarse aggregates”. C136 / C136M: 14.
10
Aquaveo LLC. (2013). “Hydraulic Toolbox”. Provo, Utah.
11
Beggan, C., and Hamilton, C.W. (2010). “New image processing software for analyzing object size-frequency distributions, geometry, orientation, and spatial distribution”. Computers & Geosciences. 36: 539–549.
12
Bergendahl, B.S., and Arneson, L.A. (2014). “FHWA Hydraulic Toolbox”, v.4.2, Desktop Reference Guide, FHWA, Lakewood, CO.
13
Buffin-Bélanger, T., and Roy, A.G. (1998). “Effects of a pebble cluster on the turbulent structure of a depth-limited flow in a gravel-bed river”, Geomorphology, 25: 249-267.
14
Buscombe, D., Rubin, D.M., and Warrick, J.A. (2010). “A universal approximation of grain size from images of noncohesive sediment”. Journal of Geophysical Research, 115(F02015).
15
Butler, J.B., Lane, S.N., and Chandler, J.H. (2001). “Automated extraction of grain-size data from gravel surfaces using digital image processing”, J. Hydraul. Res., 39: 519–529.
16
Carbonneau, P.E., Lane, S.N., and Bergeron, N.E. (2004). “Catchment-scale mapping of surface grain size in gravel bed rivers using airborne digital imagery”. WRR 40(W07202).
17
Chang, F.J., and Chung, Ch.H. (2012). “Estimation of riverbed grain-size distribution using image processing techniques”. Journal of Hydrology, 440-441: 102–112.
18
Chung, Ch.H., and Chang, F.J. (2013). “A refined automated grain sizing method for estimating river-bed grain size distribution of digital images”. Journal of Hydrology, 486: 224–233.
19
Detert, M., and Weitbrecht, V. (2012). “Automatic object detection to analyze the geometry of gravel grains – a free stand-alone tool”. River Flow 2012, R.M. Muños, ed., Taylor & Francis Group, London, ISBN 978-0-415-62129-8, 595-600.
20
Detert, M., and Weitbrecht, V. (2013). “User guide to gravelometric image analysis by BASEGRAIN”, In: Advances in River Sediment Research, S. Fukuoka, H. Nakagawa, T. Sumi, H. Zhang, eds., Taylor & Francis Group, London, ISBN 978-1-138-00062-9, 1789-1795.
21
Fehr, R. (1987). “Einfache Bestimmung der Korngrössenverteilung von Geschiebematerial mit Hilfe der Linienzahlanalyse (Simple detection of grain size distribution of sediment material using line-count analysis)”. Schweizer Ingenieur undArchitekt 105(38); 1104–1109. (In German)
22
Ferreira, T., and Rasband, W.S. (2012). “ImageJ, User Guide”, IJ 1.46r, U.S. National Institutes of Health, Bethesda, Maryland, USA, imagej.nih.gov/ij/docs/ guide/, 2010-2012.
23
Graf, W. and Altinakar, M. (1998). Fluvial Hydraulics, Wiley, New York.
24
Graham, D.J., Reid, I., and Rice, S.P. (2005a). “Automated sizing of coarse grained sediments: Image-processing procedures”. Mathematical Geology, 37(1): 1-28.
25
Graham, D.J., Rice, S.P., and Reid, I. (2005b). “A transferable method for the automated grain sizing of river gravels”. Water Resources Research, 41, W07020.
26
Heritage, G.L., and Milan, D.J. (2009). “Terrestrial Laser scanning of grain roughness in a gravel-bed river”. Geomor. 113, 4–11.
27
Mohajeri, H., Grizzi, S., Righetti, M., Romano, G.P., and Nikora, V. (2015). “The structure of gravel-bed flow with intermediate submergence: a laboratory study”. Water Resources Research, 51(11): 9232-9255.
28
Nikora V.I., Goring D.G. and Biggs B.F. (1998). "On gravel-bed roughness characterization". Water Resources Research. 34, 517-527.
29
Nikora, V., Goring, D., McEwan, I., and Griffiths, G. (2001). “Spatially Averaged Open-Channel Flow over Rough Bed”, Journal of Hydraulic Engineering, 127: 123–133.
30
Nikora, V., McEwan, I., McLean, S., Coleman, S., Pokrajac, D., and Walters, R. (2007). “Double-averaging concept for rough-bed open-channel and overland flows: Theoretical background”, Journal of Hydraulic Engineering. 133(8): 873-883.
31
Parker, G. (1991). “Selective sorting and abrasion of river gravel. II: Applications”. J. of Hyd. Eng., 117(2): 150-171.
32
Penders, C.A. (2010). “Determining Mean Grain-size In High Gradient Streams with Autocorrelative Digital Image Processing”, Master of Science Thesis, Appalachian State University, Boone, North Carolina, US.
33
Rasband, W.S. (2012). “ImageJ”, U.S. National Institutes of Health, Bethesda, Maryland, USA, 1997–2012.
34
Rice, S.P. (1999). “The nature and controls on downstream fining within sedimentary links”. J. of Sed. Res., 69(1): 32–39.
35
Sadeghi, S.H.R., Khaledi Darvishan, A.A.V., and Vafakhah, M. (2007). “Study on Channel Hydraulic Characteristics on Morphometric Variations of Bed Materials”, Journal of Hydraulics, 2: 1-10. (In Farsi)
36
Stähly, S., Friedrich, H., and Detert, M. (2017). “Size Ratio of Fluvial Grains’ Intermediate Axes Assessed by Image Processing and Square-Hole Sieving”, Journal of Hydraulic Engineering, American Society of Civil Engineers, 143(6): 06017005-1 to 06017005-6.
37
Strom, K.B., Kuhns, R.D., and Lucas, H.J. (2010). “Comparison of Automated Image-Based Grain Sizing to Standard Pebble-Count Methods”, Journal of Hydraulic Engineering, 136: 461–473.
38
Webb, R.H., and Leake, S.A. (2006). “Ground-water surface-water interactions and long-term change in riverine riparian vegetation in the southwestern United States”, Journal of Hydrology, 320: 302-323.
39
Weichert, R., Wickenhäuser, M., Bezzola, G.R., and Minor, H.-E. (2004). “Grain size analysis for coarse river beds using digital imagery processing”. Proc. RF 2004, Naples, Italy, 753–760.
40
ORIGINAL_ARTICLE
مطالعه آزمایشگاهی اثر جریان جت دایرهای بر رسوب شویی مخازن
یکی از مشکلات جدی در بهره برداری از سد های مخزنی، ته نشینی مواد رسوبی در مخزن آنهاست که مشکلات بهره برداری زیادی را درپی دارد. رسوبات تهنشین شده جایگزین ظرفیت موثر مخزن میگردند. در مدیریت صحیح مخازن استفاده از روشهای کنترل و تخلیه رسوب از مخازن دارای اهمیت ویژهی است. این پژوهش آزمایشگاهی با هدف بررسی تاثیر استفاده از جت مستغرق در جلوی مجرای تخلیه کنندهی تحتانی بر افزایش راندمان تخلیه رسوب حین عملیات رسوب شویی تحت فشار، انجام گرفته است. نتایج حاصل از این پژوهش نشان داد که برای دست یابی به حداکثر راندمان در تخلیه رسوب در رسوب شویی تحت فشار با حضور جت، در یک سرعت معین جت در جریان های خروجی نسبی (Qoutlet/Qj ) برابر با 83-46 بهترین موقعیت قرار گیری جت نسبت به تخلیه کنندهی تحتانی فاصله دوبرابر قطر مجرای تخلیه کنندۀ تحتانی میباشد و در جریان های خروجی نسبی (Qoutlet/Qj ) برابر با 157-120 بهترین موقعیت برای قرار گیری جت فاصله 5/2 برابر قطر موثر دهانه مجرای دریچه تخلیه می باشد.
https://jhyd.iha.ir/article_82760_d6cecbf882b5930bc91f4e9c53ac90a3.pdf
2019-01-21
111
120
10.30482/jhyd.2019.82760
مدیریت منابع آب
رسوب
جت مستغرق
راندمان رسوب شویی
زهرا
مددی اسفاد
zahramadadi21@gmail.com
1
گروه مهندسی آب،دانشکده کشاورزی،دانشگاه شهید با هنر،کرمان،ایران
AUTHOR
محمد مهدی
احمدی
ahmadi_mm@uk.ac.ir
2
استادیار دانشگاه شهید باهنر کرمان, دانشکده کشاورزی. بخش مهندسی آب
LEAD_AUTHOR
مجید
رحیم پور
rahimpour@uk.ac.ir
3
گروه مهندس و علوم آب/دانشکده کشاورزی/ دانشگاه شهید باهنر کرمان/ ایران.
AUTHOR
امام قلی زاده، ص.؛ بینا، م.؛ جهانی، ح. (1386)." بررسی و ارزیابی رسوبشویی تحت فشار در سدهای مخزنی با استفاده از مدل فیزیکی"، تحقیقات منابع آب ایران، سال سوم، شماره10، ص.ص. 29-47.
1
توفیقی، س؛ محمد ولی سامانی، ج.؛ ایوب زاده، س. ع. (1394)."رسوبشویی تحت فشار با توسعه مجرای تخلیه کننده تحتانی در مخزن سد"، مجله علمی پژوهشی عمران مدرس، دوره 15، شماره 2، ص.ص. 127-136.
2
رجبی پور، ن. (1396)."مدل سازی فیزیکی انسداد دریچه تخلیه سدها و ارائه راهکارهای برون رفت از آن"، پایان نامه کارشناسی ارشد، دانشکده کشاورزی، دانشگاه شهید با هنر کرمان.
3
شهیرنیا، م.؛ ایوب زاده، س. ع.؛ محمد ولی سامانی، ج. (1393). "بررسی تأثیر تراز رسوب مخزن بر راندمان رسوب زدایی تحت فشار"، مجله هیدرولیک، دوره9، شماره1، ص.ص. 36-52.
4
عبدی پور، ا.؛ احمدی، ح.؛ شمسایی، ا. (1394)."بررسی و ارزیابی اثر جت در فلاشینگ تحت فشار مخازن سدهای برق آبی"، نشریه سد و نیروگاه برق آبی، سال دوم، شماره 7، ص.ص. 45-58.
5
مددی، م. (1395)."بررسی آزمایشگاهی راهکارهای افزایش راندمان تخلیه رسوب از مخازن در هنگام عملیات شاس، رساله دکتری، دانشکده کشاورزی، دانشگاه شهید با هنر کرمان.
6
مشکاتی شهمیرزادی، م. ا.؛ دهقانی، ا. ا.؛ امام قلی زاده، ص.؛ مساعدی، ا. (1388)." تأثیر ابعاد دریچه تحتانی برحجم و ابعاد مخروط آبشستگی در رسوبشویی تحت فشار"، هشتمین سمینار بینالمللی مهندسی رودخانه، دانشگاه شهید چمران اهواز.
7
وزارت نیرو (1391). "راهنمای مطالعات رسوب گذاری و رسوب زدایی مخازن سدها"، نشریه589، ص. 302.
8
Althaus, J.M. Cesare, G.D. Schleiss, A.J. (2015). “Sediment evacuation from reservoirs through intakes by jet-induced flow”. J. Hydraulic Eng. 141, pp. 401-407.
9
Atkinson, E. (1996). “The feasibility of flushing sediment from reservoirs.” Report OD/ITM 54, HR Wallingford, UK.
10
Fruchart, F. and Camenen, B. (2012). “Reservoir sedimentation: different type of flushing-friendly flushing example of Genissiat dam flushing”. In ICOLD International Symposium on Dams for a changing world (pp. 6-p).
11
Powell, D.N. and Khan, A.A. (2012). “Scour upstream of a circular orifice under constant head”. J.Hydraulic Res., 50, pp. 28-34.
12
Powell, D.N. and Khan, A.A. (2015). “Flow field upstream of an orifice under fixed bed and equilibrium scour conditions”. J. Hydraulic Eng., 141(2), p.04014076.
13
ORIGINAL_ARTICLE
بررسی تأثیر تنگ شدگی های قائم ورودی بر روی مشخصات هیدرولیکی شیب شکن قائم با استفاده از مدل عددی
شیب شکن های قائم، سازه هایی هستند که در کانال های آبیاری، زهکشی، جمع آوری آب های سطحی استفاده میشوند. در تحقیق حاضر به بررسی عددی اثرات تنگ شدگی های قائم ورودی بر روی مشخصات هیدرولیکی شیب شکن با استفاده از نرم افزار FLOW-3D پرداخته شده است. در گام اول برای انتخاب بهترین مدل آشفتگی از دو نوع مدل آشفتگی جریان k-e و RNG k-e استفاده گردید. در گام بعدی از چهار آرایش تنگ شدگی 2 و 0.875 ،0.5 ،0.312 =S/H (نسبت فاصله ی تنگ شدگی ها به ارتفاع شیب شکن) در مقایسه با حالت بدون تنگ شدگی در شرایط جریان زیربحرانی استفاده گردید. نتایج نشان داد که مدل آشفتگی RNG k-e با درصد خطای نسبی و RMSE کمتری نسبت به مدل k-e ، کارایی بیشتری برای شبیه سازی پارامترهای هیدرولیکی روی شیب شکن ها داشت. بر اساس نتایج بدست آمده مشاهده شد که تنگ شدگی قائم در بهینه ترین حالت در مقایسه با حالت بدون تنگ شدگی باعث کاهش مقادیر نسبی عمق آب استخر تشکیل شده در پای شیب شکن،، عمق آب پایین دست و انرژی باقیماندهی نرمال به ترتیب به مقدارهای 31/42 %، 47.23 % و 23.59 % می گردد. وجود تنگ شدگی قائم ورودی، باعث افزایش سرعت در لبۀ شیب شکن می شود و به همین دلیل با افزایش تلاطم جریان در اثر سقوط جت های تقسیم شدۀ جریان و ایجاد ناحیۀ بیشتری از اختلاط آب و هوا، باعث کاهش انرژی جنبشی پایین دست می گردد. روابطی نیز برای عمق نسبی آب استخر، عمق نسبی آب پایین دست و انرژی باقیمانده ی نرمال، با ضرایب همبستگی بالا ارائه گردید که با نتایج سایر محققین تطابق خوبی دارد.
https://jhyd.iha.ir/article_82713_27b61d7a20dd8e365f08b30c7ecfd3ec.pdf
2019-01-21
121
131
10.30482/jhyd.2019.82713
شیب شکن
تنگ شدگی قائم
اتلاف انرژی
انرژی باقیمانده
Flow-3D
امیر
قادری
amir_ghaderi@znu.ac.ir
1
University of Zanjan, Zanjan, 45371 - 38791, Iran
LEAD_AUTHOR
مهدی
دسینه
mehdi.dasineh3180@gmail.com
2
گروه عمران، دانشکده فنی و مهندسی، دانشگاه مراغه، ایران
AUTHOR
سعید
عباسی
abbasi.saeed@znu.ac.ir
3
گروه مهندسی عمران، دانشگاه زنجان
AUTHOR
تربن، س.ع.، و مشکاتی، س.م.ه. (1393). "شبیهسازی عددی اثرات هیدرولیکی شیبشکن قائم در یک کانال مستطیلی". دو فصلنامه علمی تخصصی مهندسی آب، (3)1، صص. 55-66.
1
تقیزاده، ح.، و صالحی نیشابوری، ع.ا. (1393). "بررسی عددی الگوی رفتاری جریان روی سرریزهای سه جانبی"، مجله پژوهش آب ایران، (8)14، صص. 211-215.
2
کاتورانی، س.، و کاشفیپور، س.م. (1392). "اثر مشخصات هندسی مانع و شیب کف دراپ روی شرایط هیدرولیکی جریان در دراپهای مانعدار"، مجله علوم و مهندسی آبیاری، 37(2)، صص. 51-59.
3
Bakhmeteff, M.W. (1932). "Hydraulics of open channels". New York and London, McGraw-Hill book company, Inc.
4
Chamani, M., and Beirami, M. K. (2002). "Flow characteristics at drops". Journal of Hydraulic Engineering, 128(8), 788-791.
5
Chamani, M. R., Rajaratnam, N., and Beirami, M. K. (2008). "Turbulent jet energy dissipation at vertical drops". Journal of hydraulic engineering, 134(10), 1532-1535.
6
Chanson, H. (1994). "Hydraulics of nappe flow regime above stepped chutes and spillways". Australian Civil Engineering Transactions, IEAust, 36(1), 69-76.
7
Daneshfaraz, R., Joudi, A. R., Ghahramanzadeh, A., and Ghaderi, A. (2016). "Investigation of flow pressure distribution over a stepped spillway", Advances and Applications in Fluid 334 Mechanics, 19(4), 811.
8
Daneshfaraz, R., Ghahramanzadeh, A., Ghaderi, A., Joudi, A. R., and Abraham, J. (2016). "Investigation of the Effect of Edge Shape on Characteristics of Flow under Vertical Gates". Journal‐American Water Works Association, 108(8), 425-432.
9
Daneshfaraz, R., and Ghaderi, A. (2017). "Numerical Investigation of Inverse Curvature Ogee Spillway", Civil Engineering Journal, 3(11), 1146-1156.
10
Esen, I. I., Alhumoud, J. M., and Hannan, K. A. (2004). "Energy Loss at a Drop Structure with a Step at the Base". Water international, 29(4), 523-529.
11
Farouk, M., and Elgamal, M. (2012). "Investigation of the performance of single and multi-drop hydraulic structures."International Journal of Hydrology Science and Technology, 2(1), 48-74.
12
Gill, M. A. (1979). "Hydraulics of Rectangular Vertical Drop Structures". Journal of Hydraulic Research, 17(4), 289-302.
13
Grant, D.M. and Dawson, B.D. (1998). "Open Channel Flow Measurement Handbook". 5th ed. ISCO Inc.
14
Hong, Y. M., Huang, H. S., and Wan, S. (2010). "Drop characteristics of free-falling nappe for aerated straight-drop spillway". Journal of Hydraulic Research, 48(1), 125-129.
15
Kabiri-Samani, A. R., Bakhshian, E., and Chamani, M. R. (2017). "Flow characteristics of grid drop-type dissipators". Flow Measurement and Instrumentation, 54, 298-306.
16
Liu, S. I., Chen, J. Y., Hong, Y. M., Huang, H. S., and Raikar, R. V. (2014). "Impact Characteristics of Free Over-Fall in Pool Zone with Upstream Bed Slope". Journal of Marine Science and Technology, 22(4), 476-486.
17
Lin, C., Hwung, W. Y., Hsieh, S. C., and Chang, K. A. (2007). "Experimental study on mean velocity characteristics of flow over vertical drop."Journal of Hydraulic Research, 45(1), 33-42.
18
Moore, W. L. (1943). "Energy loss at the base of a free overfall". Transactions of the American Society of Civil Engineers, 108(1), 1343-1360.
19
Moghaddam, M.A.A. (1999). "Modified theory for rectangular vertical drop structures". Unpublished report.
20
Mansouri,R., and Ziaei, A.N. (2014). "Numerical modeling of the flow in the vertical drop with inverse apron". 11th International Conference on Hydroinformatics, New York City, USA.
21
Rouse, H. (1936). "Discharge characteristics of the free overfall: Use of crest section as a control provides easy means of measuring discharge". Civil Engineering, 6(4), 257-260.
22
Rand, W. (1955). "Flow geometry at straight drop spillways". In Proceedings of the American Society of Civil Engineers, 81(9), 1-13.
23
Rajaratnam, N. and Chamani, M. R. (1995). "Energy Loss at Drops". Journal of Hydraulic Research, 33(3), 373-384.
24
Simsek, O., Akoz, M.S. and Soydan, N.G. (2016). "Numerical validation of open channel flow over a curvilinear broad-crested weir", Progress in Computational Fluid Dynamics, an International Journal, Vol. 16, No. 6, pp. 364-378.
25
USBR. (2001). "Water Measurement Manual". 3rd ed., US Government Printing Office Washington DC.
26
Versteeg, H. K., and Malalasekera, W. (2007). "An introduction to computational fluid dynamics: the finite volume method". Pearson Education.
27
White, M.P. (1943). "Discussion of Moore (1943)". ASCE, 108, 1361-1364.
28
Wu, S. and Rajaratnam, N. (1997). "Impinging Jet and Surface Fiow Regimes at Drops". Journal of Hydraulic Engineering, 36(1), 69-74.
29
Zahabi, H., Torabi, M., Alamatian, E., Bahiraei, M., and Goodarzi, M. (2018). "Effects of Geometry and Hydraulic Characteristics of Shallow Reservoirs on Sediment Entrapment". Water, 10(12), 1725.
30