@article { author = {Abbasi, Saeed and Fard Shirayeh, Mehdi}, title = {Experimental investigation of SFM structure impact on sediment flushing efficiency of reservoirs outlet gates}, journal = {Journal of Hydraulics}, volume = {14}, number = {2}, pages = {17-31}, year = {2019}, publisher = {Iranian Hydraulic Association}, issn = {2345-4237}, eissn = {2645-8063}, doi = {10.30482/jhyd.2019.165330.1354}, abstract = {sedimentation in reservoirs is a great problem, especially around the outlet gates during their operation. sediment flushing efficiency from outlet gates is very low too. in this paper a new method to increase the efficiency of sediment flushing is prepared. in this method a structure namely SFM (Sediment Flushing Motivator) consisting of two rows of piles installed inside the reservoir on upstream of gates is introduced. one to six pairs of piles with a permeability of 0%, 28.6%, 37.5%, 42.9%, 50% and 60% at two parallel rows at a distance of eight cm from each other were installed. uniform non-cohesive sand material with mean particle sizes of 0.67 mm was utilized as the bed packed sediments. the results show that at the best condition (permeability of 37.5% and row distance of eight cm) the mean flushed sediment volume increases by 161% compared to the reference test (the situation in which no SFM structure is utilized).}, keywords = {sediment flushing efficiency,SFM structure,outlet gates,Reservoir}, title_fa = {بررسی آزمایشگاهی تأثیر نفوذپذیری سازۀ SFM بر راندمان تخلیه ی رسوبات از دریچه‌های تخلیه‌ در مخازن}, abstract_fa = {ته‌نشینی مواد رسوبی در مخازن ذخیرهی آب به خصوص در پیرامون دریچه‌های تخلیه‌ی تحتانی از معضلات اصلی در بهره‌برداری از آن‌ها است. راندمان تخلیه‌ی رسوبات از دریچههای تخیله‌ی تحتانی نیز بسیار پایین است. در این مقاله روشی جدید برای افزایش راندمان تخیله‌ی رسوبات ته‌نشین شده ارائه شده است. در این روش سازهای موسوم به سازۀ SFM متشکل از دو ردیف شمع موازی در قسمت بالادست دریچه‌ی تحتانی به کف مخزن نصب میگردد. یک تا شش جفت شمع‌، با نفوذپذیری‌های 0%، 6/28%، 5/37%، 9/42%، 50% و 60% در دو ردیف موازی به فاصله‌ی هشت سانتی‌متر از هم‌دیگر نصب شد. مصالح ماسه‌ای یکنواخت غیرچسبنده با اندازه‌ی متوسط 67/0 میلی‌متر به ‌عنوان رسوباب ته‌نشین شده در مخزن مورد آزمایش قرار گرفت. نتایج نشان داد که در بهترین حالت، سازۀ SFM (نفوذپذیری 5/37% و فاصله‌ی هشت سانتیمتر بین دو ردیف) متوسط حجم رسوبات تخلیه شده از مخزن را نسبت به حالت شاهد (بدون سازۀ SFM) به میزان 161% افزایش میدهد.}, keywords_fa = {راندمان تخلیه‌ی رسوبات,سازۀ SFM,دریچه‌های تخلیه‌,مخزن}, url = {https://jhyd.iha.ir/article_92207.html}, eprint = {https://jhyd.iha.ir/article_92207_38ad64380fe2c260a72a5a0e23cac038.pdf} }