@article { author = {Samadi-Boroujeni, H. and Maleki, P. and Fattahi-Nafchi, R. and Ketabdari, M.J.}, title = {Experimental Study on the Effect of the Parallel and Flake Ripple Bed Forms on the Manning Roughness Coefficient}, journal = {Journal of Hydraulics}, volume = {8}, number = {4}, pages = {55-65}, year = {2013}, publisher = {Iranian Hydraulic Association}, issn = {2345-4237}, eissn = {2645-8063}, doi = {10.30482/jhyd.2014.6702}, abstract = {Estimation of the flow resistance is one of the most important parameters in the planning, design and operation of water resources projects, including water transfer and river system management. Bed forms, such as ripple, have significant effects on total roughness. In this paper, the effects of two types of ripples on the Manning coefficient was investigated. Experiments were performed in the Hydraulic Laboratory of Shahrekord University. Some relationships were obtained based on the geometric characteristics of the ripple bed forms and flow conditions using SPSS software. It was also observed that in the case of parallel ripple bed form, the roughness was about 47% more than that of plane bed and in the case of flake ripple bed form, the increasing rate was 43%. It was concluded that the Manning coefficient was significantly affected by the parallel shape of ripple bed form compared with the flake shape.}, keywords = {Bed form,Ripple,Manning Roughness coefficient,flow resistance}, title_fa = {بررسی آزمایشگاهی اثر شکل بستر شکنج در دو حالت موازی و پولکی بر ضریب زبری مانینگ (یادداشت تحقیقاتی)}, abstract_fa = {تخمین مقاومت در برابر جریان در برنامه‌یزی، طراحی و بهره‌برداری پروژه‌های منابع آب شامل انتقال آب و بطور خاص سیستم‌های رودخانه‌ای نقش مهمی‌ایفا می‌کند. شکل‌های مختلف بستر همچون شکنج اثرات بارزی بر کل زبری دارند. در این مقاله به منظور بررسی تأثیر دو نوع شکل بستر شکنج بر ضریب مانینگ آزمایش‌هایی در آزمایشگاه هیدرولیک دانشگاه شهرکرد انجام شد. روابطی براساس ویژگی‌های هندسی شکنج و شرایط جریان به کمک نرم‌افزار SPSS استخراج شد. همچنین مشاهده شد که زبری شکل بستر شکنج در حالت موازی قریب 47% و در حالت پولکی حدود 43 % از زبری کل را تشکیل می‌دهد؛ لذا در مطالعات مهندسی رودخانه نمی‌توان از اثر شکل بستر صرف‌نظر کرد. همچنین نتایج نشان داد ضریب مانینگ در دو شکل مختلف موازی و پولکی شکنج‌ها، اختلاف معنی‌دار داشته و ضریب زبری مانینگ در شکل موازی نسبت به پولکی 3/12 درصد بیشتر بود.}, keywords_fa = {Bed form,Ripple,Manning Roughness coefficient,flow resistance}, url = {https://jhyd.iha.ir/article_6702.html}, eprint = {https://jhyd.iha.ir/article_6702_5af21cee71b36e29cd4f27daf9ae9022.pdf} }