@article { author = {seyedian, Seyed Morteza and Ghaznavi, Somaye and Fathabadi, Abolhasan and Farasati, Masoome}, title = {Evaluation of different weighting methods to predict scour depth on grade control structures}, journal = {Journal of Hydraulics}, volume = {15}, number = {1}, pages = {25-43}, year = {2020}, publisher = {Iranian Hydraulic Association}, issn = {2345-4237}, eissn = {2645-8063}, doi = {10.30482/jhyd.2020.176682.1377}, abstract = {The scour depth estimation is of great importance. Researchers have provided many empirical relationships based on laboratory and field work, but so far no relationship has been found to be satisfactory in different situations. In this study, the accuracy of different experimental (individual) relationships was evaluated in two stages before and after the correctional correction. The results show that before and after the bias correction, the individual relations of the National Institute and Mason with the mean square error of 0.87 and 0.23 meters are the most accurate. The combination of individual relationships with combined methods models shows that the GRA and EWA methods with a mean square error of 0.25 and 0.23 meters were the most accurate among the direct methods in before and after bias correction stage. The error of the AICA and BICA indirect methods in before and after bias correction is similar to the best single relation and could not improve the results of the individual relationships. The results of local method (KNN) and artificial intelligence (LS-SVM) method before and after bias correction are equal and estimate scour depth more accurately than individual relations. Comparison of different combinational methods in before and after bias correction shows that individual relationships with maximum scour depth using different combinational methods can improve predictive accuracy.}, keywords = {bias correction,Combined methods,Experimental relations,Scour Depth}, title_fa = {ارزیابی روش‌های مختلف وزن‌دهی برای پیش‌بینی عمق آبشستگی پایین‌دست سازه‌های تثبیت بستر}, abstract_fa = {تخمین عمق آبشستگی سازه از اهمیت زیادی برخوردار است. محققین بر مبنای کارهای آزمایشگاهی و صحرایی روابط تجربی متعددی ارائه داده‌اند ولی تاکنون رابطه‌ای که در شرایط مختلف نتایج قابل قبولی داشته باشد شناخته نشده است. در این پژوهش دقت روابط مختلف تجربی (منفرد) در دو مرحله‌ی قبل و بعد از اصلاح اریبی مورد ارزیابی قرار گرفتند. نتایج نشان می‌دهد قبل و بعد از اصلاح اریبی به‌ترتیب روابط منفرد مؤسسه‌ی ملی و ماسون با میانگین مربعات خطای 87/0 و 23/0 متر بیشترین دقت را دارند. ترکیب روابط منفرد با مدل‌های ترکیبی نشان می‌دهد از بین روش‌های مستقیم در مرحله‌ی قبل و بعد از اصلاح اریبی به‌ترتیب روش GRA و EWA با میانگین مربعات خطای 25/0 و 23/0 متر بیشترین دقت را داشته است. خطای روش‌های ترکیبی غیر مستقیم AICA و BICA در مرحله‌ی قبل و بعد از اصلاح اریبی مشابه بهترین رابطه‌ی منفرد است و نتوانسته‌اند نتایج روابط منفرد را بهبود بخشند. نتایج روش موضعی (KNN) و روش هوش مصنوعی (LS-SVM) قبل و بعد از اصلاح اریبی برابر بوده و عمق آبشستگی را با دقت بیشتری نسبت به روابط منفرد برآورد کرده‌اند. مقایسه‌ی روش‌های مختلف ترکیبی در مرحله‌ی قبل و بعد از اصلاح اریبی نشان داد که کم‌ترین خطا با میانگین مربعات خطای 18/0 و 19/0 متر به‌ترتیب مربوط به LS-SVM و KNN می‌باشد. در این پژوهش مشخص شد که ترکیب روابط منفرد حداکثر عمق آبشستگی با استفاده از روش‌های مختلف ترکیبی می‌تواند دقت پیش‌بینی را بهبود بخشد.}, keywords_fa = {bias correction,Combined methods,Experimental relations,Scour Depth}, url = {https://jhyd.iha.ir/article_105686.html}, eprint = {https://jhyd.iha.ir/article_105686_3718574cd2b2f9f62f06f632c30957b5.pdf} }