کوششهای بسیاری برای افزایش راندمان استهلاک انرژی روی سرریز انجام شده است. در این پژوهش، شوت، به وسیله بلوکهای دندانهدار از جنس تفلون و با شکل هندسی و چیدمان نوآوری شده پوشش داده شده است. آزمایشها در سه شیب و شش دبی، برای پنج مدل آرایش متفاوت انجام شد. بر اساس نتایج آزمایشگاهی، تأثیر مستقیم هندسه زبری روی استهلاک انرژی بررسی گردید. همچنین افزایش میزان استهلاک انرژی به دلیل استفاده از چیدمان مختلط بلوکها با اندازههای مختلف، مشاهده شد. نهایتاً با توجه به استهلاک انرژی و عملکرد بالای سرریز پلکانی، مقایسهای بین میزان استهلاک نسبی انرژی در سرریز پلکانی و سرریز پژوهش حاضر در زبریهای معادل انجام شد که افزایش استهلاک نسبی انرژی سرریز جدید تا %21 نسبت به سرریز پلکانی مشاهده شد.
Many investigations have been performed in order to increase the efficiency of energy dissipation over the spillways. In this study, the chute was roughened by means of the dentate blocks that were made of Teflon with new geometric shape and configurations. The experiments were carried out at three slopes, under six discharges and five dentate blocks configurations. Based on the laboratory results, it was concluded that the roughness geometry influences the relative energy loss. It was also found that using mix arrangements and selecting different sizes among roughness elements can increase the value of relative energy loss. Finally, it was observed that the dentate blocks spillway caused an extra 21% reduction in energy dissipation compared to the stepped spillway which is widely utilized to dissipate the energy.