کریمایی طبرستانی، م. و زراتی، ا. ر. (1393)، "تأثیر طوق و شرایط غیرماندگاری جریان بر پایداری سنگچین در اطراف پایههای پل"، چهارمین کنفرانس بین المللی مهندسی پل، دانشگاه صنعتی امیرکبیر، تهران، ایران
Chiew, Y. M. (1992). “Scour protection at bridge piers.” J. Hydraul. Eng., 118(9), pp. 1260-1269.
Chiew, Y. M. (1995). “Mechanics of riprap failure at bridge pier.” J. Hydraul. Eng., 121(9), pp. 635-643.
Froehlich, D. C., (2013), “Protecting bridge piers with loose rock riprap”, J. Applied Water Eng. and Res., 1(1), pp. 39-57.
Grimaldi, C., Gaudio, R., Calomino, F. and Cardoso, A.H. (2009). “Countermeasures against local scouring at bridge piers: Slot and combined system of slot and bed sill.” J. Hydraul. Eng. 135(5), pp. 425–431.
Karimaee Tabarestani, M. and Zarrati A. R. (2011), “Effect of collar on time development and extent of scour hole around cylindrical bridge piers.” Int. J. Eng., Transactions C, 25(1), pp. 11-16.
Karimaee Tabarestani, M. and Zarrati A. R, (2013), “Design of stable riprap around aligned and skewed rectangular bridge piers”, J. Hydraul. Eng., 139(8), pp. 911-916.
Karimaee Tabarestani, M., Zarrati A. R., Mashahir M. B. and Mokallaf, E., (2015), “Extent of riprap layer with different stone sizes around rectangular bridge piers with or without an attached collar”, Scientia Iranica, 22(3), pp. 709-716.
Karimaee Tabarestani M. and Zarrati A. R. (2015), “Design of riprap stone around bridge pier using empirical and Neural Network Method”, Civil Engineering Infrastructures Journal, 48(1), pp. 175-188.
Kumar, V., RangaRaju, K. G., and Vittal, N. (1999). “Reduction of local scour around bridge piers using slot and collar.” J. Hydraul. Eng., 125(12), pp. 1302-1305.
Lagasse, P. F., Clopper, P. E., Zevenbergen, L. W., and Girard, L. G. (2007). “Countermeasures to protect bridge piers from scour.” NCHRP Report 593, TRB, NAS, Washington D. C., 272p.
www.trb.org.
Mashahir, M. B., Zarrati, A. R. and Mokallaf, E., (2010), “Application of riprap and collar to prevent scouring around piers rectangular bridge”, J. Hydraul. Eng., 136(3), pp. 183-187.
Melville, B. W. and Raudkivi, A. (1977). “Flow characteristics in local scour at bridge piers.” J. Hydraul. Res., 15(4), pp. 373-380.
Melville, B.W. and Hadfield, A.C. (1999). “Use of sacrificial piles as pier scour countermeasures.” J. Hydraul. Engrg., 125(11), pp. 1221-1224.
Odgaard, A.J. and Wang, Y. (1987). “Scour prevention at bridge piers.” Proc., Nat. Conf. Hydraul. Engrg., ASCE, Williamsburg, Va., pp. 5253-5257.
Raudkivi, A. and Ettema, R. (1983). “Clear water scour at cylindrical piers.” J. Hydraul. Engrg. 109(3), pp. 338–350.
Richardson, E. V. and Davis, S. R. (2001). “Evaluating scour at bridges.” Hydraul. Eng. Circular, No. 18 (HEC-18 Fourth Edition), FHWA NHI 01-001, Federal Highway Administration, Washington, D.C.
Raudkivi, A. J. (1998). Loose boundary hydraulics, Balkema, Rotterdam. The Netherlands.
Tafarojnoruz, A., Gaudio, R. and Calomino, F., (2012). “Bridge pier scour mitigation under steady and unsteady flow conditions”, ActaGeophysica, 60(4), pp. 1076-1097.
Zarrati, A. R., Gholami, H. and Mashahir, M. B. (2004). “Application of collar to control scouring around rectangular bridge piers”, J. Hydraul. Res., 42(1), pp. 97-103.
Zarrati, A. R., Nazariha, M. and Mashahir, M. B. (2006). “Reduction of local scour in the vicinity of bridge pier groups using collars and riprap.” J. Hydraul. Eng., 132(2), pp. 154-162.
Zarrati, A. R., Chamani, M. R., Shafaei, A. and Latifi, M. (2010). “Scour countermeasures for cylindrical bridge piers using riprap and combination of collar and riprap”, I. J. Sed. Res., 25(3), p. 31
)
